The signal board is mounted directly on the front of the CPU body; without occupying the cabinet space,its installation and disassembly are convenient and quick. For a small amount of I/O points extension and more demand for communication ports, the signal board with new design can provide more economical and flexible solutions.
Product Specifications :
| Model |
SB DT04 |
| Order No.: (MLFB) |
6ES7 288-5DT04-0AA0 |
| Standard |
| Dimension W x H x D (mm) |
35 x 52.2 x 16 |
| Weight |
18.1 g |
| Power consumption |
1.0 W |
| Current consumption (SM bus) |
50 mA |
| Current consumption (24 V DC) |
Each input used 4mA |
| Analogue input |
| No. of Inputs |
2 |
| Type |
Sinking type/sourcing type (IEC type 1 sinking) |
| Rated voltage |
24 V DC, When the current is 4 mA, nominal value |
| Allowable continuous voltage |
Max. 30 V DC |
| Surge voltage |
35 V DC, lasting 0.5 s |
| Logic 1 signal (min) |
15 V DC when the current is 2.5mA. |
| Logic 0 signal (max) |
5 V DC when the current is 1 mA. |
| Isolation (field side and logic side) |
500 V AC, lasting 1 min |
| Isolation group |
1 |
| Filter time |
Each channel can be selected separately
0.2, 0.4, 0.8, 1.6, 3.2, 6.4 and 12.8 μs
0.2, 0.4, 0.8, 1.6, 3.2, 6.4 and 12.8 μs |
| Number of inputs connected at the same time |
2 |
| Cable length |
500 m (shielded), 300 m (non shielded) |
| Digital output |
| Number of outputs |
2 |
| Type of output |
Solid state -MOSFET |
| Voltage range |
20.4 ~ 28.8 V DC |
| Logic 1 signal at max current |
Min 20 V DC |
| Logic 0 signal at max current |
Max 0.1 V DC |
| Rated current of each point (max) |
0.5 A |
| Lamp load |
5 W |
| Contact resistance in the ON status |
Max 0.6 Ω |
| Current leakage at point |
Max. 10 μA |
| Surge current |
5 A, max lasting 100 ms |
| Overload protection |
No |
| Isolation (field side and logic side) |
500 V AC, lasting 1 min |
| Isolation group |
1 |
| Current of each public end |
1:00 AM |
| Inductive voltage clamp |
L + – 48 V, 1 W loss |
| Switching delay |
Disconnected to connected maximally 2 μs connected to disconnected maximally 10 μs |
| Output state under the STOP mode |
Last value or replicable value (The default value is 0) |
| Number of inputs connected at the same time |
2 |
| Cable length (max) |
500 m (shielded), 150 m (non shielded) |
