| Article number |
6ES7138-4CF03-0AB0 |
6ES7138-4CF42-0AB0 |
|
ET200S, Powermod. PM-E F PM, DC24V |
ET200S, Powermod. PM-E F PP, DC24V |
| Supply voltage |
|
|
| Load voltage L+ |
|
|
| ● Rated value (DC) |
24 V |
24 V |
| ● Reverse polarity protection |
No |
No |
| Input current |
|
|
| From load voltage L+ (no load), typ. |
100 mA |
100 mA |
| from backplane bus 24 V DC, max. |
28 mA |
28 mA |
| Power loss |
|
|
| Power loss, typ. |
4 W |
4 W |
| Address area |
|
|
| Address space per module |
|
|
| ● Inputs |
5 byte |
5 byte |
| ● Outputs |
5 byte |
5 byte |
| Digital outputs |
|
|
| Number of digital outputs |
2 |
1; Relays |
| Short-circuit protection |
Yes; Electronic |
No |
| ● Response threshold, typ. |
Response threshold (short-circuit): 5 to 12 A; response threshold (external short-circuit to ground): 5 to 12 A; response threshold (external short-circuit to P potential): 25 to 45 A |
|
| Limitation of inductive shutdown voltage to |
L+ (-2x 47 V) |
|
| Controlling a digital input |
No |
Yes |
| Switching capacity of the outputs |
|
|
| ● on lamp load, max. |
10 W |
100 W |
| Load resistance range |
|
|
| ● lower limit |
12 Ω |
|
| ● upper limit |
1 kΩ |
|
| Output voltage |
|
|
| ● for signal “1”, min. |
L+ (-2,0 V), current sourcing switch: L+ (-1,5 V), voltage drop on current sinking switch: max. 0.5 V |
|
| Output current |
|
|
| ● for signal “1” rated value |
2 A |
|
| ● for signal “1” permissible range for 0 to 60 °C, min. |
20 mA |
|
| ● for signal “1” permissible range for 0 to 60 °C, max. |
2.4 A |
|
| ● for signal “0” residual current, max. |
0.5 mA |
|
| Parallel switching of two outputs |
|
|
| ● for uprating |
No |
|
| ● for redundant control of a load |
No |
|
| Switching frequency |
|
|
| ● with resistive load, max. |
30 Hz |
2 Hz |
| ● with inductive load, max. |
0.1 Hz |
0.1 Hz; with inductive load to IEC 60947-5-1, DC-13 / AC-15 |
| ● on lamp load, max. |
10 Hz |
2 Hz |
| Total current of the outputs (per group) |
|
|
| horizontal installation |
|
|
| — up to 40 °C, max. |
10 A |
10 A |
| — up to 55 °C, max. |
7 A |
8 A |
| — up to 60 °C, max. |
6 A |
7 A |
| vertical installation |
|
|
| — up to 40 °C, max. |
6 A |
8 A |
| Relay outputs |
|
|
| Switching capacity of contacts |
|
|
| — with resistive load, up to 50 °C, max. |
10 A |
10 A |
| Cable length |
|
|
| ● shielded, max. |
200 m |
|
| ● unshielded, max. |
200 m |
|
| Interrupts/diagnostics/status information |
|
|
| Diagnostics function |
Yes |
Yes |
| Diagnoses |
|
|
| ● Diagnostic information readable |
Yes |
Yes |
| ● Wire-break |
Yes |
No |
| ● Short-circuit |
Yes |
Yes |
| ● missing load voltage |
Yes |
Yes |
| Diagnostics indication LED |
|
|
| ● Rated load voltage PWR (green) |
Yes |
Yes |
| ● Group error SF (red) |
Yes |
Yes |
| ● Status indicator digital output (green) |
Yes |
Yes |
| Potential separation |
|
|
| Potential separation digital outputs |
|
|
| ● between the channels |
No |
No |
| ● between the channels and backplane bus |
Yes |
Yes |
| ● Between the channels and load voltage L+ |
No |
No |
| Isolation |
|
|
| Isolation tested with |
500 V DC |
500 V DC |
| Standards, approvals, certificates |
|
|
| Highest safety class achievable in safety mode |
|
|
| ● acc. to EN 954 |
4 |
4 |
| ● Performance level according to ISO 13849-1 |
e |
e |
| ● SIL acc. to IEC 61508 |
Up to SIL 3 |
With Std-DO: Max. SIL 2, without Std-DO max. SIL 3 depending on configuration |
| Dimensions |
|
|
| Width |
30 mm |
30 mm |
| Height |
81 mm |
81 mm |
| Depth |
52 mm |
52 mm |
| Weights |
|
|
| Weight, approx. |
88 g |
80 g |
