SIMATIC S7-1500 – F Digital Input Module F-DI 16x 24 V DC – Siemens Fail-safe I/O Modules

USD $ 983.21

SKU: 6ES7526-1BH00-0AB0

Using fail-safe ET 200MP/S7-1500 modules makes it possible to implement safety-related application requirements as an integral part of the overall automation. The safety functions required for fail-safe operation are integrated in the modules. Communication with the fail-safe SIMATIC S7 CPUs is performed by means of PROFIsafe.

The modules can be operated both in centralized and distributed configurations.

Siemens Fail-safe Modules S7-1500 Product Specifications:

Article number 6ES7526-1BH00-0AB0
ET 200MP, F-DI 16X24VDC
General information
Product type designation F-DI 16x24VDC
Firmware version
● FW update possible Yes
Product function
● I&M data Yes; I&M0 to I&M3
Engineering with
● STEP 7 TIA Portal configurable/integrated from version V13 SP1 with HSP 0086
Operating mode
● DI Yes
Supply voltage
Rated value (DC) 24 V
permissible range, lower limit (DC) 19.2 V
permissible range, upper limit (DC) 28.8 V
Reverse polarity protection Yes
power supply according to NEC Class 2 required No
Input current
Current consumption (rated value) 50 mA; without load
Current consumption, max. 60 mA; without load
Encoder supply
Number of outputs 4
Short-circuit protection Yes; Electronic (response threshold 0.7 A to 1.8 A)
24 V encoder supply
● 24 V Yes; min. L+ (-1.5 V)
● Short-circuit protection Yes
● Output current, max. 300 mA; Max. 100 mA when mounted vertically
Power
Power available from the backplane bus 0.9 W
Power loss
Power loss, typ. 4.6 W
Address area
Address space per module
● Inputs 9 byte; S7-300/400F CPU, 8 byte
● Outputs 5 byte; S7-300/400F CPU, 4 byte
Hardware configuration
Automatic encoding Yes
● Electronic coding element type F Yes
Digital inputs
Number of digital inputs 16
Source/sink input Yes; P-reading
Input characteristic curve in accordance with IEC 61131, type 1 Yes
Input voltage
● Rated value (DC) 24 V
● for signal “0” -30 to +5 V
● for signal “1” +15 to +30 V
Input current
● for signal “1”, typ. 3.7 mA
Input delay (for rated value of input voltage)
for standard inputs
— parameterizable Yes
— at “0” to “1”, min. 0.4 ms
— at “0” to “1”, max. 20 ms
— at “1” to “0”, min. 0.4 ms
— at “1” to “0”, max. 20 ms
Cable length
● shielded, max. 1 000 m
● unshielded, max. 500 m
Interrupts/diagnostics/status information
Diagnostics function Yes
Alarms
● Diagnostic alarm Yes
● Hardware interrupt No
Diagnoses
● Monitoring the supply voltage Yes
● Wire-break No
● Short-circuit Yes
● Group error Yes
Diagnostics indication LED
● RUN LED Yes; green LED
● ERROR LED Yes; red LED
● Channel status display Yes; green LED
● for channel diagnostics Yes; red LED
● for module diagnostics Yes; red LED
Potential separation
Potential separation channels
● between the channels and backplane bus Yes
Isolation
Isolation tested with 707 V DC (type test)
Standards, approvals, certificates
Suitable for safety functions Yes
Highest safety class achievable in safety mode
● Performance level according to ISO 13849-1 PLe
● SIL acc. to IEC 61508 SIL 3
Probability of failure (for service life of 20 years and repair time of 100 hours)
— Low demand mode: PFDavg in accordance with SIL3 < 5.00E-05
— High demand/continuous mode: PFH in accordance with SIL3 < 1.00E-09 1/h
Ambient conditions
Ambient temperature during operation
● horizontal installation, min. 0 °C
● horizontal installation, max. 60 °C
● vertical installation, min. 0 °C
● vertical installation, max. 40 °C
Dimensions
Width 35 mm
Height 147 mm
Depth 129 mm
Weights
Weight, approx. 280 g
Weight 0.340 kg
Dimensions 15.1 × 15.1 × 4.7 cm

Related products