| Sensing range |
5 mm 0.197 in (fixed) |
| Minimum sensing object |
0.8 x 1.8 mm 0.031 x 0.071 in opaque object |
| Hysteresis |
0.05 mm 0.002 in or less |
| Repeatability |
0.03 mm 0.001 in or less |
| Supply voltage |
5 to 24 V DC ±10 % Ripple P-P 10 % or less |
| Current consumption |
15 mA or less |
| Output |
<NPN output type>
NPN open-collector transistor
• Maximum sink current: 50 mA
• Applied voltage: 30 V DC or less (between output and 0 V)
• Residual voltage: 0.7 V or less (at 50 mA sink current), 0.4 V or less (at 16 mA sink current)<PNP output type>
PNP open-collector transistor
• Maximum source current: 50 mA
• Applied voltage: 30 V DC or less (between output and +V)
• Residual voltage: 0.7 V or less (at 50 mA source current), 0.4 V or less (at 16 mA source current) |
|
Utilization category |
DC-12 or DC-13 |
| Output operation |
Incorporated with 2 outputs: Light-ON / Dark-ON |
| Response time |
Under light received condition: 20 µs or less, Under light interrupted condition: 100 µs or less
(Response frequency: 1 kHz or more) (Note 2) |
| Operation indicator |
Vermilion LED (lights up under light received condition) |
| Pollution degree |
3 (Industrial environment) |
| Ambient temperature |
–25 to +55 ℃ -13 to +131 ℉ (No dew condensation or icing allowed),
Storage: –30 to +80 ℃ –22 to +176 ℉ |
| Ambient humidity |
35 to 85 % RH, Storage: 35 to 85 % RH |
| Ambient illuminance |
Fluorescent light: 1,000 ℓx at the light-receiving face |
| EMC |
EN 60947-5-2 |
| Voltage withstandability |
1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Insulation resistance |
50 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Vibration resistance |
10 to 2,000 Hz frequency, 1.5 mm 0.059 in amplitude in X, Y and Z directions for two hours each |
| Shock resistance |
15,000 m/s2 acceleration (1,500 G approx.) in X, Y and Z directions for three times each |
| Emitting element |
Infrared LED (Peak emission wavelength: 940 nm 0.037 mil, non-modulated) |
| Material |
Enclosure: PBT, Slit cover: Polycarbonate, Terminal part [PM-□54(P) only]: Solder plated |
| Cable |
0.09 mm2 4-core cabtyre cable, 1 m 3.281 ft long |
– |
| Cable extension |
Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. |
| Weight |
Net weight: 15 g approx. |
Net weight: 3 g approx. |
