Contact Us:
sales@inosaki.com
USD $ 14.95 – USD $ 29.90
[fusion_table fusion_table_type=”1″ fusion_table_rows=”” fusion_table_columns=”” margin_top=”1ps” margin_right=”” margin_bottom=”” margin_left=”” hide_on_mobile=”small-visibility,medium-visibility,large-visibility” class=”” id=”” animation_type=”” animation_direction=”left” animation_color=”” hue=”” saturation=”” lightness=”” alpha=”” animation_speed=”0.3″ animation_delay=”0″ animation_offset=””]
Type | Ultra-small | ||
---|---|---|---|
With flexible cable | |||
Model No. | NPN output | PM-□24 | PM-□24-R |
PNP output | PM-□24P | – | |
Sensing range | 5 mm 0.197 in (fixed) | ||
Minimum sensing object | 0.8 x 1.8 mm 0.031 x 0.071 in opaque object | ||
Hysteresis | 0.05 mm 0.002 in or less | ||
Repeatability | 0.03 mm 0.001 in or less | ||
Supply voltage | 5 to 24 V DC ±10 % Ripple P-P 10 % or less | ||
Current consumption | 15 mA or less | ||
Output | <NPN output type> NPN open-collector transistor • Maximum sink current: 50 mA • Applied voltage: 30 V DC or less (between output and 0 V) • Residual voltage: 0.7 V or less (at 50 mA sink current), 0.4 V or less (at 16 mA sink current)<PNP output type> PNP open-collector transistor • Maximum source current: 50 mA • Applied voltage: 30 V DC or less (between output and + V) • Residual voltage: 0.7 V or less (at 50 mA source current), 0.4 V or less (at 16 mA source current) |
||
Utilization category | DC-12 or DC-13 | ||
Output operation | Incorporated with 2 outputs: Light-ON / Dark-ON | ||
Response time | Under light received condition: 20 µs or less Under light interrupted condition: 100 µs or less (Response frequency: 1 kHz or more) (Note 2) |
||
Operation indicator | Vermilion LED (lights up under light received condition) | ||
Pollution degree | 3 (Industrial environment) | ||
Ambient temperature (Note 3, 4) |
–25 to +55 ℃ –13 to +131 ℉ (No dew condensation or icing allowed), Storage: –30 to +80 ℃ –22 to +176 ℉ |
||
Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH | ||
Ambient illuminance | Fluorescent light: 1,000 ℓx at the light-receiving face | ||
EMC | EN 60947-5-2 | ||
Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure | ||
Insulation resistance | 50 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure | ||
Vibration resistance | 10 to 2,000 Hz frequency, 1.5 mm 0.059 in amplitude in X, Y and Z directions for two hours each | ||
Shock resistance | 15,000 m/s2 acceleration (1,500 G approx.) in X, Y and Z directions for three times each | ||
Emitting element | Infrared LED (Peak emission wavelength: 940 nm 0.037 mil, non-modulated) | ||
Material | Enclosure: PBT, Slit cover: Polycarbonate | ||
Cable | 0.09 mm2 4-core cabtyre cable [PM-□24-R: 0.1 mm2 flexible, oil and heat resistant cabtyre cable (Note 5)], 1 m 3.281 ft long | ||
Cable extension | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. | ||
Weight | Net weight: 10 g approx. |
[/fusion_table]
Notes:
[fusion_table fusion_table_type=”1″ fusion_table_rows=”” fusion_table_columns=”” margin_top=”1ps” margin_right=”” margin_bottom=”” margin_left=”” hide_on_mobile=”small-visibility,medium-visibility,large-visibility” class=”” id=”” animation_type=”” animation_direction=”left” animation_color=”” hue=”” saturation=”” lightness=”” alpha=”” animation_speed=”0.3″ animation_delay=”0″ animation_offset=””]
1) | Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉. |
---|---|
2) | The response frequency is the value when the disc, given in the figure below, is rotated. |
3) | In case the PM-24 series is used at an ambient temperature of +50 ℃ +122 ℉, or more, make sure to mount it on a metal body. |
4) | Take care that the flexibility of the PM-□24-R cable is lost if the ambient temperature in –10 ℃ +14 ℉ or less. |
5) | The cable of PM-□24-R is a flexible cable usable on a moving base. When the sensor is mounted on a moving base, fix the sensor cable joint so that stress is not applied to it. (Models other than the PM-□24-R cannot be used on a moving base.) |
[/fusion_table]
INOSAKI Limited
RM B 5/F Gaylord Comm,
Bldg 114-118 Lockhart Rd.
Hong Kong
INOSAKI Sdn. Bhd.
2-1-9, Ground Floor, One Square, Tingkat Mahsuri 1,
11900 Bayan Lepas, Penan
INOSAKI Pte. Ltd.
101 Upper Cross Street,
No. 06-17, People’s Park Centre,
Singapore (058357)
inosaki.com 2008 -2024