Menu
Menu
$ 54.05
Schneider TeSys Deca series contactor LC1DT32BDC, 4P (4NO) 32A, AC-1, 1NO+1NC aux contact, 24V DC coil, screw wiring certification (IEC, CCC, CCS, RoHS, REACH).
| Main | |
| Part Number | LC1DT32BDC |
| Product Series | TeSys Deca |
| Product Series | TeSys Deca |
| product type | Contactor |
| product short name | LC1D |
| Application field of contactor | Applied to AC loads with power factor greater than or equal to 0.95 Applied to non-inductive or slightly inductive loads, resistance furnaces |
| use category | AC-1AC -3 |
| number of poles | 4P |
| Rated working voltage [Ue] | Power circuit: <= 690 V AC 25…400 Hz Power circuit: <= 225 V DC |
| Rated operating current [Ie] | 32 A 60 °C) at <= 440 V AC AC-3 for power circuits 18 A 60 °C) at <= 440 V AC AC-1 for power circuits |
| [Uc] control circuit voltage | 24 V DC |
| Additional information | |
| model | LC1D |
| Loop contact type | 4 NO |
| protection cap | None |
| Conventional thermal current [Ith] | 10 A at <60 °C for signal circuits 32 A at <60 °C for power circuits |
| Rated short-time withstand current [Icw] | 145 A at <40 °C – 10 s for power circuit 240 A at <40 °C – 1 s for power circuit 40 A at <40 °C – 10 min for power circuit 84 A at <40 °C – 1 minute for power circuit 100 A – 1 s for signal circuit 120 A – 500 ms for signal circuit 140 A – 100 ms for signal circuit |
| Fuses for use with relays | 10 A gG for signal circuits according to IEC 60947-5-1 50 A gG at <= 690 V for power circuits type 1 35 A gG for power circuits for type 2 at <= 690 V |
| average impedance | 2.5 mΩ – Ith 32 A 50 Hz for power loop |
| Rated insulation voltage [Ui] | Power circuit: 690 V conforming to IEC 60947-4-1 Signal circuit: 690 V conforming to IEC 60947-1 |
| Overvoltage category | III |
| pollution level | 3 |
| Rated impulse withstand voltage [Uimp] | 6 kV according to IEC 60947 |
| Safety and reliability level | B10d = Contactor for 1369863 nominal loads according to EN/ISO 13849-1 B10d = Contactor for 20000000 mechanical loads according to EN/ISO 13849-1 |
| Mechanical life | 30 Mcycles |
| Electrical life | 1 Mcycles 32 A AC-1 <= 440 V at Ue |
| Control loop characteristics | DC standard |
| Surge Suppression Module | Built-in bidirectional peak current limiting diode |
| Control voltage limit | 0.1…0.25 Uc -40…60 °C release 0.7…1.25 Uc -40…60 °C run |
| Surge power (W) | 5.4W (20°C) |
| Holding power consumption(W) | 5.4 W at 20 °C |
| Rated operating power (W) | 5.4W |
| action time | 55 ms to close, 20 ms to break |
| time constant | 28ms |
| operating frequency | 3600 cycles/h at <60 °C |
| Wiring capacity | Control circuit: Bolt fastening1 1…4 mm² Cable selection: Flexible cord without wire terminals Control circuit: Bolt fastening2 1…4 mm² Cable selection: Flexible cord without wire terminal Control circuit: Bolt fastening 1 1…4 mm² cable option: flexible cable with cable terminals control circuit: screw fastened2 1…2.5 mm² cable option: flexible cable with cable terminal control circuit: screw cable option1 1…4 mm² cable option : Solid without wire terminals Control circuit: Bolt fastening2 1…4 mm² Cable selection: Solid without wire terminals Power circuit: Terminal 1 2.5…10 mm² Lug outer diameter Ø: 8 mm Cable selection Type: Flexible cord without wire terminals Power circuit: Terminal 2 2.5…10 mm² Lug Ø: 8 mm Cable selection: Flexible cord without wire terminals Power circuit: Terminal 1 2.5…10 mm² Lug Outer diameter Ø: 8 mm Cable option: Flexible cord with wire terminals Power circuit: Terminal 2 2.5…10 mm² Lug outer diameter Ø: 8 mm Cable option: Flexible cord with bar terminals Power circuit: Terminal 1 2.5…16 mm² O.D. lug Ø: 8 mm Cable option: Solid without cable terminals Power circuit: Terminal 2 2.5…16 mm² Ø Lug: 8 mm Cable option: Solid without cable Wire terminal power circuit: screw connection |
| Tightening torque | Control circuit: 1.7 Nm via screwdriver Ø 6 flat control circuit: 1.7 Nm via screwdriver No 2 Phillips screw power circuit: 1.8 Nm via screwdriver Ø 6 flat power circuit: 1.8 Nm via screw Screwdriver No. 2 for fastening Phillips screw Power circuit: 1.8 Nm Screwdriver Ø 6 flat-blade screw via cable connector: M3.5 Power circuit: 1.8 Nm Phillips screw driver No. 2 via cable connector Screw: M3.5 Control circuit: 1.7 Nm Screwdriver pozidriv No 2 for screw tightening Power circuit: 1.8 Nm Screwdriver pozidriv No 2 for screw tightening |
| Auxiliary contact type | 1 NO + 1 NC |
| Auxiliary contact type | Type Mechanical connection 1 NO + 1 NC conforming to IEC 60947-5-1 Type mirrored with main contact status 1 NC conforming to IEC 60947-4-1 |
| Signal loop frequency | 25…400Hz |
| Minimum switching current [Imin] | 5 mA for signal loop |
| Insulation resistance | > 10 MΩ for signal loops |
| non-overlapping time | 1.5 ms between de-energized NC and NO contacts 1.5 ms between energized NC and NO contacts |
| installation method | DIN rail installation base plate installation |
| environment | |
| standard | GB 14048.4 IEC 60947-4-1 |
| certified product | CCC CE UKCA |
| IP protection class | IP2x front panel for main circuits conforming to IEC 60529 IP2x front panel for coil circuits conforming to IEC 60529 |
| Protective measures | TH conforms to IEC 60068-2-30 |
| ambient air temperature | -40…60 °C operation 60…70 °C with derating -60…80 °C storage |
| working altitude | 3000 m None |
| Fire resistance and abnormal high temperature resistance | 850 °C conforming to IEC 60695-2-11 |
| Shock and vibration resistance | Shock resistance with contacts open (2 gn (5…300 Hz)) conforming to IEC 60068-2-6 Shock resistance with contacts closed ( 4 gn (5…300 Hz)) conforming to IEC 60068-2-6 Shock performance 11 ms with contacts closed (15 gn) conforming to IEC 60068-2-27 Shock resistance 11 ms with contacts open (8 gn) conforming to IEC 60068-2-27 |
| high | 91 mm |
| width | 45 mm |
| depth | 107mm |
| Product Weight | 0.425 kg |
| packaging unit | |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 9.3 cm |
| Package 1 Width | 11.6 cm |
| Package 1 Length | 5.2 cm |
| Package 1 Weight | 446.63g |
| Unit Type of Package 2 | CAR |
| Number of Units in Package 2 | 16 |
| Package 2 Height | 30.0cm |
| Package 2 Width | 40.0cm |
| Package 2 Length | 15.0cm |
| Package 2 Weight | 7.196 kg |
| Unit Type of Package 3 | PAL |
| Number of Units in Package 3 | 256 |
| Package 3 Height | 60.0cm |
| Package 3 Width | 80.0cm |
| Package 3 Length | 75.0cm |
| Package 3 Weight | 114.536 kg |
| contract warranty | |
| Warranty | 18 months |
| Weight | 0.425 kg |
|---|---|
| Dimensions | 10.7 × 4.5 × 9.1 cm |
INOSAKI Limited
RM B 5/F Gaylord Comm,
Bldg 114-118 Lockhart Rd.
Hong Kong
INOSAKI Sdn. Bhd.
2-1-9, Ground Floor, One Square, Tingkat Mahsuri 1,
11900 Bayan Lepas, Penan
INOSAKI Pte. Ltd.
101 Upper Cross Street,
No. 06-17, People’s Park Centre,
Singapore (058357)
