$ 2,090.70
The modules are used centrally with SIMATIC S7-31xF-2 DP and in the ET 200M distributed I/O device together with SIMATIC IM151-7 F-CPU, S7-31xF-2 DP, S7-416F-2 and S7-400F/FH.
0 – 20 mA and 4 – 20 mA current transmitters (also HART) can be connected as encoders.
Article number | 6ES7336-4GE00-0AB0 | |
SM 336, f.AI 6 X 0/4 … 20mA HART | ||
Supply voltage | ||
Rated value (DC) | 24 V | |
Reverse polarity protection | Yes | |
Load voltage L+ | ||
● Rated value (DC) | 24 V | |
● Reverse polarity protection | Yes | |
Input current | ||
From power supply L+, typ. | 150 mA | |
from backplane bus 5 V DC, max. | 90 mA | |
Power loss | ||
Power loss, typ. | 4.5 W | |
Analog inputs | ||
Number of analog inputs | 6 | |
permissible input current for current input (destruction limit), max. | 40 mA | |
Input ranges | ||
● Voltage | No | |
● Current | Yes | |
● Thermocouple | No | |
● Resistance thermometer | No | |
● Resistance | No | |
Input ranges (rated values), currents | ||
● 0 to 20 mA | Yes | |
— Input resistance (0 to 20 mA) | 150 Ω; typ. 150 ohms max. 175 ohms | |
● 4 mA to 20 mA | Yes | |
— Input resistance (4 mA to 20 mA) | 150 Ω; typ. 150 ohms max. 175 ohms | |
Cable length | ||
● shielded, max. | 1 000 m | |
Analog value generation for the inputs | ||
Integration and conversion time/resolution per channel | ||
● Resolution with overrange (bit including sign), max. | 16 bit; 15 bit + sign | |
● Integration time (ms) | 20 ms @ 50 Hz, 16.7 ms @ 60 Hz | |
● Interference voltage suppression for interference frequency f1 in Hz | f=n x (f1 ±0.5 %) | |
Encoder | ||
Connection of signal encoders | ||
● for current measurement as 2-wire transducer | Yes | |
● for current measurement as 4-wire transducer | Yes | |
Errors/accuracies | ||
Operational error limit in overall temperature range | ||
● Current, relative to input range, (+/-) | 0.2 %; 40 µA | |
Basic error limit (operational limit at 25 °C) | ||
● Current, relative to input range, (+/-) | 0.1 % | |
Interrupts/diagnostics/status information | ||
Diagnostics function | Yes | |
Alarms | ||
● Diagnostic alarm | Yes | |
Diagnoses | ||
● Diagnostic information readable | Yes | |
Diagnostics indication LED | ||
● Fail-safe operation | Yes | |
● Group error SF (red) | Yes | |
● Encoder supply Vs (green) | No | |
Potential separation | ||
Potential separation analog inputs | ||
● between the channels | Yes | |
● between the channels and backplane bus | Yes | |
● between the channels and the power supply of the electronics | Yes | |
Isolation | ||
Isolation tested with | 370V for 1 min | |
Standards, approvals, certificates | ||
Highest safety class achievable in safety mode | ||
● acc. to EN 954 | 4 | |
● Performance level according to ISO 13849-1 | e | |
● SIL acc. to IEC 61508 | SIL 3 | |
connection method / header | ||
required front connector | 20-pin | |
Dimensions | ||
Width | 40 mm | |
Height | 125 mm | |
Depth | 120 mm | |
Weights | ||
Weight, approx. | 350 g |
Weight | 0.345 kg |
---|---|
Dimensions | 13.1 × 15.1 × 5 cm |
INOSAKI Limited
RM B 5/F Gaylord Comm,
Bldg 114-118 Lockhart Rd.
Hong Kong
INOSAKI Sdn. Bhd.
2-1-9, Ground Floor, One Square, Tingkat Mahsuri 1,
11900 Bayan Lepas, Penan
INOSAKI Pte. Ltd.
101 Upper Cross Street,
No. 06-17, People’s Park Centre,
Singapore (058357)