SIMATIC ET 200SP – IM 155-6MF High Feature MultiFieldbus Interface Module – Siemens
USD $ 636.24
SKU: N/A
SIMATIC IM155-6MF High Feature, MultiFieldbus IM with two slots for SIMATIC BusAdapters
Differences compared to the 2-port IM155-6PN/2 High Feature:
- Multi-protocol capability
Operation on Ethernet controllers via the PROFINET, EtherNet/IP and Modbus protocols - Compatible with IM155-6MF High Feature (as of 6ES7155-6AU01-0CN0);
Exception: Isochronous mode and prioritized startup - Shared device:
Simultaneous access from different controllers via different Ethernet protocols PROFINET, EtherNet/IP and Modbus TCP - Local data links:
Deterministic, easy-to-configure data exchange between controllers, also via different Ethernet protocols PROFINET, EtherNet/IP and Modbus TCP
Siemens Interface Modules ET 200SP Product Specifications:
Article number | 6ES7155-6MU00-0CN0 |
ET 200SP, IM155-6MF HF | |
General information | |
Product type designation | IM 155-6 MF HF |
Firmware version | V5.1.1 |
● FW update possible | Yes |
Vendor identification (VendorID) | 002AH |
Device identifier (DeviceID) | 0313H |
Manufacturer ID according to ODVA (VendorID) | 04E3H |
Device ID according to ODVA (Product code) | 0FA2H |
Product function | |
● I&M data | Yes; I&M0 to I&M3 |
● Module swapping during operation (hot swapping) | Yes; Multi-hot swapping |
● Isochronous mode | No |
● Tool changer | Yes; Docking station and docking unit |
● Local coupling, IO data | No |
● Local coupling, data records | No |
Engineering with | |
● STEP 7 TIA Portal configurable/integrated from version | via IM155-6PN/2 HF in compatibility mode |
● STEP 7 configurable/integrated from version | via IM155-6PN/2 HF in compatibility mode |
● PROFINET from GSD version/GSD revision | GSDML V2.3 |
● Multi Fieldbus Configuration Tool (MFCT) | V1.0 Update 2 |
Configuration control | |
via dataset | Yes |
Supply voltage | |
Rated value (DC) | 24 V |
permissible range, lower limit (DC) | 19.2 V |
permissible range, upper limit (DC) | 28.8 V |
Reverse polarity protection | Yes |
Mains buffering | |
● Mains/voltage failure stored energy time | 10 ms; according to IEC 61131-2 (6.2.1.3) severity degree PS2 |
Input current | |
Current consumption, max. | 700 mA |
Inrush current, max. | 4.5 A |
I²t | 0.25 A²·s |
Power loss | |
Power loss, typ. | 2.4 W |
Address area | |
Address space per module | |
● Address space per module, max. | 288 byte; For input and output data respectively |
Address space per station | |
● Address space per station, max. | 1 440 byte; Dependent on configuration |
Hardware configuration | |
Rack | |
● Quantity of operable ET 200SP modules, max. | 64 |
● Quantity of operable ET 200AL modules, max. | 16 |
Submodules | |
● Number of submodules per station, max. | 256 |
Time stamping | |
Accuracy | 10 ms |
Interfaces | |
Number of PROFINET interfaces | 1; 2 ports (switch) |
1. Interface | |
Interface types | |
● Number of ports | 2; via BusAdapter |
● integrated switch | Yes |
● BusAdapter (PROFINET) | Yes; compatible BusAdapters: BA 2x RJ45, BA 2x M12, BA 2x FC, BA 2x LC, BA LC/RJ45, BA LC/FC, BA 2x SCRJ, BA SCRJ/RJ45, BA SCRJ/FC, |
Protocols | |
● PROFINET IO Device | Yes |
● Open IE communication | Yes |
● Media redundancy | Yes; PROFINET MRP |
Interface types | |
RJ 45 (Ethernet) | |
● Transmission procedure | PROFINET with 100 Mbit/s full duplex (100BASE-TX) |
● 10 Mbps | No |
● 100 Mbps | Yes; PROFINET with 100 Mbit/s full duplex (100BASE-TX) |
● Autonegotiation | Yes |
● Autocrossing | Yes |
Protocols | |
Modbus TCP | Yes |
Number of connections | |
● Number of MtM communication relationships/connections, max. | 16 |
PROFINET IO Device | |
Services | |
— IRT | No |
— PROFIenergy | Yes |
— Prioritized startup | No |
— Shared device | No |
Redundancy mode | |
● PROFINET system redundancy (S2) | Yes; NAP S2 |
● H-Sync forwarding | Yes |
Media redundancy | |
— MRP | Yes |
— MRPD | No |
EtherNet/IP | |
Services | |
— CIP Implicit Messaging | Yes |
— CIP Explicit Messaging | Yes |
— CIP Safety | No |
— Configuration control via Explicit Messaging | No |
— Shared device | No |
Updating times | |
— Requested Packet Interval (RPI) | 2 ms |
Address area | |
— Address space per module, max. | 288 byte; (246 byte outputs / 288 byte inputs) |
— ForwardOpen (Class1 & 32 bit Header) | 500 byte; (246 byte outputs / 500 byte inputs) |
— LargeForwardOpen (Class3) | 4 002 byte |
Connections | |
— Number of rack connections | 1 |
Modbus TCP | |
Services | |
— Read Holding Registers (Code=3) | Yes |
— Write Multiple Registers (Code=16) | Yes |
— Parameter change by master | Yes |
— Modbus TCP Security Protocol | No |
Address space per station | |
— Address space per station, max. | 500 byte; (246 byte outputs / 500 byte inputs) |
— Access-consistent address space | 250 byte; (246 byte outputs / 250 byte inputs) |
Updating time | |
— I/O request interval | 2 ms |
Connections | |
— Number of connections per slave | 9; (1x inputs / 2x outputs / 4x volatile registers / 2x Device Info) |
Open IE communication | |
● TCP/IP | Yes |
● UDP | Yes |
● SNMP | Yes |
● LLDP | Yes |
● ARP | Yes |
● IGMP | Yes |
● Multicast | Yes |
● Broadcast | Yes |
● IPv4 | Yes |
Interrupts/diagnostics/status information | |
Status indicator | Yes |
Alarms | Yes |
Diagnostics function | Yes |
Diagnostics indication LED | |
● RUN LED | Yes; green LED |
● ERROR LED | Yes; red LED |
● MAINT LED | Yes; Yellow LED |
● Monitoring of the supply voltage (PWR-LED) | Yes; green PWR LED |
● NS LED | Yes; green/red LED |
● MS LED | Yes; green/red LED |
● IO LED | Yes; red-green-yellow LED |
● Connection display LINK TX/RX | Yes; 2x green link LEDs on BusAdapter |
Potential separation | |
between backplane bus and electronics | No |
between PROFINET and all other circuits | Yes |
between supply and all other circuits | No |
Isolation | |
Isolation tested with | 707 V DC (type test) |
Standards, approvals, certificates | |
Network loading class | 3 |
Security level | According to Security Level 1 Test Cases V1.1.1 |
Ambient conditions | |
Ambient temperature during operation | |
● horizontal installation, min. | -30 °C; No condensation |
● horizontal installation, max. | 60 °C |
● vertical installation, min. | -30 °C; No condensation |
● vertical installation, max. | 50 °C |
Altitude during operation relating to sea level | |
● Installation altitude above sea level, max. | 5 000 m; Restrictions for installation altitudes > 2 000 m, see manual |
connection method / header | |
ET-Connection | |
● via BU/BA Send | Yes; + 16 ET 200AL modules |
Mechanics/material | |
Strain relief | Yes; Optional |
Dimensions | |
Width | 50 mm |
Height | 117 mm |
Depth | 74 mm |
Weights | |
Weight, approx. | 120 g; without BusAdapter |
Weight | N/A |
---|---|
Dimensions | N/A |
Related products
-
Select options This product has multiple variants. The options may be chosen on the product page Details
-
Select options This product has multiple variants. The options may be chosen on the product page Details
-
Select options This product has multiple variants. The options may be chosen on the product page Details
-
Select options This product has multiple variants. The options may be chosen on the product page Details
-
Select options This product has multiple variants. The options may be chosen on the product page Details
-
Select options This product has multiple variants. The options may be chosen on the product page Details