Contact Us:
sales@inosaki.com
USD $ 448.50
[fusion_table fusion_table_type=”1″ fusion_table_rows=”” fusion_table_columns=”” margin_top=”1ps” margin_right=”” margin_bottom=”” margin_left=”” hide_on_mobile=”small-visibility,medium-visibility,large-visibility” class=”” id=”” animation_type=”” animation_direction=”left” animation_color=”” hue=”” saturation=”” lightness=”” alpha=”” animation_speed=”0.3″ animation_delay=”0″ animation_offset=””]
Article number | 6ES7138-4DB03-0AB0 |
ET200S, El-Mod., 1SSI 25Bit/1MHz | |
Supply voltage | |
Load voltage L+ | |
● Rated value (DC) | 24 V |
● permissible range, lower limit (DC) | 20.4 V |
● permissible range, upper limit (DC) | 28.8 V |
● Reverse polarity protection | Yes |
Input current | |
from load voltage L+ (without load), max. | 40 mA |
from backplane bus 3.3 V DC, max. | 10 mA |
Encoder supply | |
24 V encoder supply | |
● 24 V | Yes |
● Short-circuit protection | Yes |
● Output current, max. | 500 mA |
Absolute encoder (SSI) encoder supply | |
● Absolute encoder (SSI) | Yes |
● Type of output voltage | L+ (-0.8 V) |
● Short-circuit protection | Yes |
● Output current, max. | 500 mA |
Power loss | |
Power loss, typ. | 1 W |
Hardware configuration | |
Module exchange | |
● Module exchange during operation of the IM-DP | Yes |
● Module exchange under process voltage | Yes |
Digital inputs | |
Number of digital inputs | 1 |
Input voltage | |
● for signal “0” | -30 to +5 V |
● for signal “1” | +11 to +30V |
Input current | |
● for signal “0”, max. (permissible quiescent current) | 2 mA |
● for signal “1”, typ. | 9 mA |
Input delay (for rated value of input voltage) | |
for standard inputs | |
— at “0” to “1”, max. | 300 µs |
— at “1” to “0”, max. | 300 µs |
Cable length | |
● shielded, max. | 50 m |
Encoder | |
Number of connectable encoders, max. | 1 |
Connectable encoders | |
● Absolute encoder (SSI) | Yes |
● 2-wire sensor | Yes; Type 2 |
Encoder signals, absolute encoder (SSI) | |
● Input signal | to RS-422 |
● Telegram length, parameterizable | 13, 14, 16, 21, 24 & 25 bit |
● Binary code | Yes |
● Gray code | Yes |
● Cable length, shielded, max. | 320 m; At 125 kHz |
● Monoflop time | 16/32/48/64 µs |
Interrupts/diagnostics/status information | |
Diagnostics indication LED | |
● Group error SF (red) | Yes |
● Status indicator digital input (green) | Yes |
● Status indicator forward counting (green) | Yes |
● Status indicator backward counting (green) | Yes |
Potential separation | |
Potential separation digital inputs | |
● Potential separation digital inputs | No; same potential with L+ and SSI |
Potential separation counter | |
● between the channels and backplane bus | Yes |
● Between the channels and load voltage L+ | No |
Dimensions | |
Width | 15 mm |
Height | 81 mm |
Depth | 52 mm |
Weights | |
Weight, approx. | 40 g |
[/fusion_table]
Weight | 0.045 kg |
---|---|
Dimensions | 6.1 × 8.8 × 2.2 cm |
INOSAKI Limited
RM B 5/F Gaylord Comm,
Bldg 114-118 Lockhart Rd.
Hong Kong
INOSAKI Sdn. Bhd.
2-1-9, Ground Floor, One Square, Tingkat Mahsuri 1,
11900 Bayan Lepas, Penan
INOSAKI Pte. Ltd.
101 Upper Cross Street,
No. 06-17, People’s Park Centre,
Singapore (058357)
inosaki.com 2008 -2024