Contact Us:
sales@inosaki.com
USD $ 28.98 – USD $ 48.30
Loctite SF 712 : Isopropanol amine solvent-based liquid cyanoacrylate activator used where increased cure speed of LOCTITE cyanoacrylate adhesives is required.
Loctite SF 770 : Polyolefin primer for surface preparation and is ideal for use with difficult-to-bond plastics.
Loctite SF 7387 : Substituted dihydropyridine activator with n-Heptane and isopropanol for LOCTITE toughened adhesives to initiate the cure of acrylic adhesives.
Loctite SF 7452 : Transparent, light amber, cure-speed accelerator for LOCTITE cyanoacrylate adhesives. It can be either pre- or post-applied.
Loctite is an brand of adhesives, sealants, surface treatments, and other industrial chemicals that include acrylic, anaerobic, cyanoacrylate, epoxy, hot melt, silicone, urethane, and UV/light curing technologies.
[fusion_table fusion_table_type=”1″ fusion_table_rows=”” fusion_table_columns=”” margin_top=”1ps” margin_right=”” margin_bottom=”” margin_left=”” hide_on_mobile=”small-visibility,medium-visibility,large-visibility” class=”” id=”” animation_type=”” animation_direction=”left” animation_color=”” hue=”” saturation=”” lightness=”” alpha=”” animation_speed=”0.3″ animation_delay=”0″ animation_offset=””]
Loctite SF 712 |
LOCTITE® SF 712 is a transparent, isopropanol amine solvent-based liquid cyanoacrylate activator used where increased cure speed of LOCTITE cyanoacrylate adhesives is required. It can be either pre- or post-applied to the bond. It is especially suited for post-application on cyanoacrylate adhesive to ensure rapid fixturing. Typical applications include securing wires or coils to PCBs.
Volume: 52ml |
Loctite SF 770 |
LOCTITE® SF 770 is a primer used to make polyolefin and other low-energy surfaces suitable for bonding with LOCTITE instant adhesives. The cured performance of LOCTITE® instant adhesives is ensured on such treated surfaces. It is only recommended for difficult-to-bond substrates which include polyethylene, polypropylene, polytetrafluoroethylene (PTFE) and thermoplastic rubber materials. LOCTITE SF 770 is not recommended in assemblies where high peel strength is required.
Volume: 52ml |
Loctite SF 7387 |
LOCTITE® SF 7387 is a yellow to amber, transparent liquid substituted dihydropyridine activator containing the solvents n-Heptane and isopropanol. It is designed for LOCTITE toughened adhesives to initiate the cure of acrylic adhesives.
Volume: 50ml |
Loctite SF 7452 |
LOCTITE® SF 7452 is transparent, light amber, cure-speed accelerator for the increased cure speed of LOCTITE cyanoacrylate adhesives. It can be either pre- or post-applied. It is especially suited for post-application on cyanoacrylate adhesive to ensure rapid fixturing. Typical applications include securing wires or coils to PCBs, tamper-proofing adjustable components, mounting stand-offs, edge guides and board stiffeners.
Volume: 52ml |
[/fusion_table]
Net Volume (ml) |
---|
INOSAKI Limited
RM B 5/F Gaylord Comm,
Bldg 114-118 Lockhart Rd.
Hong Kong
INOSAKI Sdn. Bhd.
2-1-9, Ground Floor, One Square, Tingkat Mahsuri 1,
11900 Bayan Lepas, Penan
INOSAKI Pte. Ltd.
101 Upper Cross Street,
No. 06-17, People’s Park Centre,
Singapore (058357)
inosaki.com 2008 -2024