Contact Us:
sales@inosaki.com

Omron EE-SY671 EE-SY672 Series – Photomicro Sensors- Diffuse-Reflective

USD $ 33.58USD $ 41.17

SKU N/A Category

Omron produce industrial sensors range such as fiber sensors, photoelectric sensors, displacement sensors/ measurement sensors, proximity sensors, photomicro sensors and rotary encodes.

Features

• Easy adjustment with a built-in sensitivity adjuster.

• Easy optical axis monitoring with a bright light indicator.

• Compact design incorporating a built-in amplifier and special IC enables direct switching capacity of up to 100 mA.

• Wide operating voltage range: 5 to 24 VDC

• Connection possible with a range of ICs, relays, and Programmable Controllers (PLCs).

 

Lineup

Sensors

[fusion_table fusion_table_type=”1″ fusion_table_rows=”” fusion_table_columns=”” margin_top=”1ps” margin_right=”” margin_bottom=”” margin_left=”” hide_on_mobile=”small-visibility,medium-visibility,large-visibility” class=”” id=”” animation_type=”” animation_direction=”left” animation_color=”” hue=”” saturation=”” lightness=”” alpha=”” animation_speed=”0.3″ animation_delay=”0″ animation_offset=””]

Appearance Sensing method Sensing distance Output type Output configuration Model
Horizontal type 444_lu_1_1 Reflective type 1 to 5 mm
(Infrared light)
NPN output Dark-ON or Light-ON
(Selectable) *
EE-SY671
Vertical type 444_lu_1_2 EE-SY672

[/fusion_table]

* The Dark-ON/Light-ON (selectable) models are normally used as dark-ON models. To use them as light-ON models, short-circuit the L terminal and positive (+) terminal.
An EE-1001-1 Connector with the terminals already short-circuited is also available.

 

Accessories (Order Separately)

[fusion_table fusion_table_type=”1″ fusion_table_rows=”” fusion_table_columns=”” margin_top=”1ps” margin_right=”” margin_bottom=”” margin_left=”” hide_on_mobile=”small-visibility,medium-visibility,large-visibility” class=”” id=”” animation_type=”” animation_direction=”left” animation_color=”” hue=”” saturation=”” lightness=”” alpha=”” animation_speed=”0.3″ animation_delay=”0″ animation_offset=””]

Type Cable length Model Remarks
Connector Connector EE-1001
EE-1001-1 L terminal and positive (+) terminal are
already short-circuited.
EE-1009 *
Connector with Cable 1 m EE-1006 1M
EE-1010 1M *
2 m EE-1006 2M
EE-1010 2M *
Connector with Robot Cable 1 m EE-1010-R 1M *
2 m EE-1010-R 2M *
Connector Hold-down Clip EE-1006A Applicable Photomicrosensors
For EE-SY671 and 672 only.
(Can be used only with EE-1006
Connectors for the
Photomicrosensors listed above.)

[/fusion_table]

Note: For details, refer to the Photomicro Sensors Accessories on EE-[] which can be accessed from your OMRON website.
* EE-1009- or EE-1010-series Connectors have a builtin locking mechanism to prevent cable disconnection when only the cable is pulled. To remove the Connector from the Sensor, grip the top and bottom of the Connector firmly and push into the Sensor once before pulling out. The locking mechanism prevents the Connector from being removed by pulling on the cable only and enables removal only when the Connector (housing) is pulled.

 

Specifications

[fusion_table fusion_table_type=”1″ fusion_table_rows=”” fusion_table_columns=”” margin_top=”1ps” margin_right=”” margin_bottom=”” margin_left=”” hide_on_mobile=”small-visibility,medium-visibility,large-visibility” class=”” id=”” animation_type=”” animation_direction=”left” animation_color=”” hue=”” saturation=”” lightness=”” alpha=”” animation_speed=”0.3″ animation_delay=”0″ animation_offset=””]

Models EE-SY671, EE-SY672
Sensing distance 1 to 5 mm (Reflection factor: 90%; white paper 15 × 15 mm)
Sensing object Transparent or opaque: 15 × 15 mm min.
Differential distance 0.5 max. (with a sensing distance of 3 mm, horizontally)
Light source GaAs infrared LED with a peak wavelength of 940 nm
Indicator *1 Light indicator (red)
Supply voltage 5 to 24 VDC ±10%, ripple (p-p): 10% max.
Current consumption 40 mA max.
Control output NPN open collector:
Load power supply voltage: 5 to 24 VDC
Load current: 100 mA max.
OFF current: 0.5 mA max.
100 mA load current with a residual voltage of 0.8 V max.
40 mA load current with a residual voltage of 0.4 V max.
Response frequency *2 50 Hz min. (Average: 500 Hz)
Ambient illumination *3 1,500 lx max. with fluorescent light on the surface of the receiver
Ambient temperature range Operating: – 25 to +55°C
Storage: – 30 to +80°C
Ambient humidity range Operating: 5% to 85%
Storage: 5% to 95%
Vibration resistance Destruction: 20 to 2,000 Hz (peak acceleration: 100 m/s2)
1.5-mm double amplitude for 2 h (4-min periods) each in X, Y, and Z directions
Shock resistance Destruction: 500m/s2 for 3 times each in X, Y, and Z directions
Degree of protection IEC IP50
Connecting method Special connector (direct soldering possible)
Weight Approx. 3.5 g (including screwdriver for adjustment)
Material Case Polybutylene phthalate (PBT)
Emitter/receiver Polycarbonate
Accessories Screwdriver for adjustment

[/fusion_table]

*1. The indicator is a GaP red LED (peak wavelength: 690 nm).
*2. The response frequency was measured by detecting the following rotating disk.

 

EE-SY671 / 672 Specifications 2

*3. The ambient illuminance is measured on the surface of the receiver.

Additional information

Select your currency