$ 124.20
Manufacturer Part Number: MOXA EDS-2008-ELP
OEM Spec Ref
The MOXA EDS-2008-ELP Unmanaged Switch is an industrially optimized network solution designed to streamline the integration and management of network devices within industrial settings without requiring extensive setup. This robust device ensures reliable network communications, essential for the efficient operation of automated systems and industrial applications.
Key Features:
Benefits:
Applications:
The MOXA EDS-2008-ELP Unmanaged Switch stands out as a fundamental component in MOXA’s portfolio, specifically designed to meet the rigorous demands of modern industrial environments, thereby enhancing network reliability and performance without the complexity of management features.
Ethernet Interface | 10/100BaseT(X) Ports (RJ45 connector) | 8 Full/Half duplex mode Auto MDI/MDI-X connection Auto negotiation speed |
Standards | IEEE 802.3 for 10BaseT IEEE 802.1p for Class of Service IEEE 802.3u for 100BaseT(X) IEEE 802.3x for flow control |
|
Optical Fiber | Refer table 2 | |
Switch Properties | Processing Type | Store and Forward |
MAC Table Size | 2 K | |
Packet Buffer Size | 768 kbits | |
DIP Switch Configuration | Ethernet Interface | Quality of Service (QoS) , Broadcast Storm Protection (BSP) |
Power Parameters | Connection | 1 removable 3-contact terminal block(s) |
Input Current | 0.052 A @ 24 VDC | |
Input Voltage | 12/24/48 VDC | |
Operating Voltage | 9.6 to 60 VDC | |
Overload Current Protection | Supported | |
Reverse Polarity Protection | Supported | |
Physical Characteristics | Dimensions | 36 x 81 x 65 mm (1.4 x 3.19 x 2.56 in) |
Installation | DIN-rail mounting Wall mounting (with optional kit) |
|
Housing | Plastic | |
Weight | 110.5 g (0.24 lb) | |
Environmental Limits | Ambient Relative Humidity | 5 to 95% (non-condensing) |
Operating Temperature | -10 to 60°C (14 to 140°F) | |
Storage Temperature | -40 to 85°C (-40 to 185°F) | |
Standards and Certifications | Safety | UL 61010-2-201 EN 62368-1 |
EMC | EN 55032/35 EN 61000-6-2/-6-4 |
|
EMI | CISPR 22, 32, FCC Part 15B Class A | |
EMS | IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV IEC 61000-4-6 CS: 10 V IEC 61000-4-8 PFMF |
|
Shock | IEC 60068-2-27 | |
Vibration | IEC 60068-2-6 | |
Freefall | IEC 60068-2-32 | |
MTBF | Time | 3,696,394 hrs |
Standards | Telcordia (Bellcore), GB | |
Warranty | Warranty Period | 5 years |
Details | See www.moxa.com/warranty |
100BaseFX | ||||
Multi-Mode | Single-Mode | |||
Fiber Cable Type | OM1 | 50/125 µm | G.652 | |
800 MHz x km | ||||
Typical Distance | 4 km | 5 km | 40 km | |
Wavelength | Typical (nm) | 1300 | 1310 | |
TX Range (nm) | 1260 to 1360 | 1280 to 1340 | ||
RX Range (nm) | 1100 to 1600 | 1100 to 1600 | ||
Optical Power | TX Range (dBm) | -10 to -20 | 0 to -5 | |
RX Range (dBm) | -3 to -32 | -3 to -34 | ||
Link Budget (dB) | 12 | 29 | ||
Dispersion Penalty (dB) | 3 | 1 |
Note: When connecting a single-mode fiber transceiver, we recommend using an attenuator to prevent damage caused by excessive optical power.
Note: Compute the “typical distance” of a specific fiber transceiver as follows: Link budget (dB) > dispersion penalty (dB) + total link loss (dB).
Weight | 0.1105 kg |
---|---|
Dimensions | 3.6 × 8.1 × 6.5 cm |
INOSAKI Limited
RM B 5/F Gaylord Comm,
Bldg 114-118 Lockhart Rd.
Hong Kong
INOSAKI Sdn. Bhd.
2-1-9, Ground Floor, One Square, Tingkat Mahsuri 1,
11900 Bayan Lepas, Penan
INOSAKI Pte. Ltd.
101 Upper Cross Street,
No. 06-17, People’s Park Centre,
Singapore (058357)
inosaki.com 2008 -2024