Contact Us:
sales@inosaki.com

Omron E3Z-G Series – Photoelectric Sensors – Built-in Amplifier

USD $ 40.25USD $ 110.40

SKU N/A Category

Omron produce industrial sensors range such as fiber sensors, photoelectric sensors, displacement sensors/ measurement sensors, proximity sensors, photomicro sensors and rotary encodes.

Features

• Groove-type Sensor with groove width of 25 mm.

• Models are available with one or two light axes.

• Models are available with M8 pre-wired connectors.

Lineup

Sensors

[fusion_table fusion_table_type=”1″ fusion_table_rows=”” fusion_table_columns=”” margin_top=”1ps” margin_right=”” margin_bottom=”” margin_left=”” hide_on_mobile=”small-visibility,medium-visibility,large-visibility” class=”” id=”” animation_type=”” animation_direction=”left” animation_color=”” hue=”” saturation=”” lightness=”” alpha=”” animation_speed=”0.3″ animation_delay=”0″ animation_offset=””]

Sensing
method
Appearance Connection
method
Sensing
distance
No. of
optical
axes
Model
NPN output PNP output
Through-
beam
1168_lu_1_1
Pre-wired (2 m) 25 mm
(Infrared
light)
1 E3Z-G61 2M *1 *2 E3Z-G81 2M *1 *2
Pre-wired Connector
(M8, 4 pins)
E3Z-G61-M3J 0.3M E3Z-G81-M3J 0.3M
Pre-wired (2 m) 2 E3Z-G62 2M *1 E3Z-G82 2M *1
Pre-wired Connector
(M8, 4 pins)
E3Z-G62-M3J 0.3M E3Z-G82-M3J 0.3M

[/fusion_table]

*1. M12 Standard Pre-wired Connector Models are also available.
When ordering, add “-M1J 0.3M” to the end of the model number (e.g., E3Z-G61-M1J 0.3M). The cable is 0.3 m long.
*2. M12 Pre-wired Smart click Connector Models are also available.
When ordering, add “-M1TJ 0.3M” to the end of the model number (e.g., E3Z-G61-M1TJ 0.3M). The cable is 0.3 m long.

 

Accessories (Order Separately)

Sensor I/O Connectors (Sockets on One Cable End)

(Models with Pre-wired Connectors: A Connector is not provided with the Sensor. Be sure to order a Connector separately.)

[fusion_table fusion_table_type=”1″ fusion_table_rows=”” fusion_table_columns=”” margin_top=”1ps” margin_right=”” margin_bottom=”” margin_left=”” hide_on_mobile=”small-visibility,medium-visibility,large-visibility” class=”” id=”” animation_type=”” animation_direction=”left” animation_color=”” hue=”” saturation=”” lightness=”” alpha=”” animation_speed=”0.3″ animation_delay=”0″ animation_offset=””]

Cable specification Appearance Type of cable Model
Standard cable 1168_lu_2_1 2 m 4-wire XS3F-M421-402-A
5 m XS3F-M421-405-A
1168_lu_2_2 2 m XS3F-M422-402-A
5 m XS3F-M422-405-A
Vibration-proof
robot cable
1168_lu_2_1 2 m XS3F-M421-402-R
5 m XS3F-M421-405-R
1168_lu_2_2 2 m XS3F-M422-402-R
5 m XS3F-M422-405-R

[/fusion_table]

Note: Refer to Introduction to Sensor I/O Connectors/Sensor Controllers for details.

Protective Bracket

A Protective Bracket is not provided with the Sensor. Order a Protective Bracket separately if required.

[fusion_table fusion_table_type=”1″ fusion_table_rows=”” fusion_table_columns=”” margin_top=”1ps” margin_right=”” margin_bottom=”” margin_left=”” hide_on_mobile=”small-visibility,medium-visibility,large-visibility” class=”” id=”” animation_type=”” animation_direction=”left” animation_color=”” hue=”” saturation=”” lightness=”” alpha=”” animation_speed=”0.3″ animation_delay=”0″ animation_offset=””]

Appearance Model Applicable model
E39-L149 E3Z-G

[/fusion_table]

 

Specifications

[fusion_table fusion_table_type=”1″ fusion_table_rows=”” fusion_table_columns=”” margin_top=”1ps” margin_right=”” margin_bottom=”” margin_left=”” hide_on_mobile=”small-visibility,medium-visibility,large-visibility” class=”” id=”” animation_type=”” animation_direction=”left” animation_color=”” hue=”” saturation=”” lightness=”” alpha=”” animation_speed=”0.3″ animation_delay=”0″ animation_offset=””]

Sensing method Distance-settable
Model NPN output E3Z-LS61 E3Z-LS66 E3Z-LS63 E3Z-LS68
PNP output E3Z-LS81 E3Z-LS86 E3Z-LS83 E3Z-LS88
Sensing distance BGS White or black paper (100 × 100 mm): 20 mm to set distance 2 mm to set distance (80 mm max.)
FGS White paper (100 × 100 mm): Set distance to 200 mm min. —–
Black paper (100 × 100 mm): Set distance to 160 mm min.
Setting range White paper (100 × 100 mm): 40 to 200 mm. Black paper (100 × 100 mm): 40 to 160 mm White paper (25 × 25 mm): 20 to 80 mm
Differential travel 10% of set distance max. (Refer to Differential Travel vs. Sensing Distance on Data Sheet.) 2% of set distance max.
Reflectivity characteristic (black/white error) 10% of set distance max. 5% of set distance max.
Light source (wavelength) Red LED (680 nm) Red LED (650 nm)
Power supply voltage 12 to 24 VDC ±10%, ripple (p-p): 10% max.
Current consumption 30 mA max.
Control output Load power supply voltage: 26.4 VDC max., Load current: 100 mA max. (residual voltage 1 V max.),
Open collector output (NPN or PNP depending on model)
Light-ON/Dark-ON switch selectable
BGS/FGS selection BGS: Open or connected to GND BGS: Open or connected to GND
FGS: Connected to Vcc
Protection circuits Reversed power supply polarity protection, Output short-circuit protection, Mutual interference prevention
Response time Operate or reset: 1 ms max.
Distance setting 5-turn endless adjuster
Ambient illumination (Receiver side) Incandescent lamp: 3,000 lx max.; Sunlight: 10,000 lx max.
Ambient temperature range Operating: -25 to 55°C, Storage: -40 to 70°C (with no icing or condensation)
Ambient humidity range Operating: 35% to 85%, Storage: 35% to 95% (with no condensation)
Insulation resistance 20 MΩ min. at 500 VDC
Dielectric strength 1,000 VAC at 50/60 Hz for 1 minute
Vibration resistance Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance Destruction: 500 m/s2 for 3 times each in X, Y, and Z directions
Degree of protection IP67 (IEC 60529)
Connection method Pre-wired (standard lengths: 2 m and 0.5 m) Connector (M8, 4 pins) Pre-wired (standard lengths: 2 m and 0.5 m) Connector (M8, 4 pins)
Indicators Operation indicator (orange), Stability indicator (green)
Weight (packed state) Pre-wired Sensors, 2 m: Approx. 65 g Approx. 20 g Pre-wired Sensors, 2 m: Approx. 65 g Approx. 20 g
Material Case PBT (polybutylene terephthalate)
Lens Modified polyarylate resin

[/fusion_table]

 

[fusion_table fusion_table_type=”1″ fusion_table_rows=”” fusion_table_columns=”” margin_top=”1ps” margin_right=”” margin_bottom=”” margin_left=”” hide_on_mobile=”small-visibility,medium-visibility,large-visibility” class=”” id=”” animation_type=”” animation_direction=”left” animation_color=”” hue=”” saturation=”” lightness=”” alpha=”” animation_speed=”0.3″ animation_delay=”0″ animation_offset=””]

Number of optical axes 1 2
Model NPN output E3Z-G61/E3Z-G61-M3J E3Z-G62/E3Z-G62-M3J
PNP output E3Z-G81/E3Z-G81-M3J E3Z-G82/E3Z-G82-M3J
Sensing distance (distance between arms of groove) 25 mm
Standard sensing object Opaque, 1.5-mm dia. min.
Light source (wavelength) Infrared LED (940 nm)
Power supply voltage 12 to 24 VDC±10%, ripple (p-p): 10% max.
Current consumption 25 mA max. 40 mA max.
Control output  Load power supply voltage: 26.4 VDC max.  Load current: 100 mA max. (Residual voltage: 1 V max.)

Open collector output (NPN or PNP depending on model)

Light-ON/Dark-ON selectable

Protection circuits Reversed power supply polarity protection, Output short-circuit protection, and Mutual interference prevention
Response time Operate or reset: 1 ms max.
Ambient illumination (Receiver side) Incandescent lamp: 3,000 lx max.  Sunlight: 10,000 lx max.
Ambient temperature range Operating: -25 to 55°C, Storage: -40 to 70°C (with no icing or condensation)
Ambient humidity range Operating: 35% to 85%, Storage: 35% to 95% (with no condensation)
Insulation resistance 20 MΩ min. at 500 VDC between lead wires and case
Dielectric strength 1,000 VAC, 50/60 Hz for 1 min between lead wires and case
Vibration resistance Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance Destruction: 500 m/s2 3 times each in X, Y, and Z directions
Degree of protection IP64 (IEC 60529)
Connection method Pre-wired cable (standard length: 2 m and 0.5 m)/Pre-wired Connector (standard length: 300 mm)
Indicator Operation indicator (orange)
Weight (packed state) Pre-wired (with 2-m cable) Approx. 65 g
Pre-wired Connectors Approx. 30 g
Material Case ABS (Acrylonitril Butadiene Styrene)
Accessories Instruction manual

[/fusion_table]

Additional information

Weight N/A
Select your currency