CP1H-XA40D – Omron CP series CP1H CPU Unit – Programmable Controllers

USD $ 798.60 – USD $ 864.60

SKU: N/A

Omron Automation Systems include Programmable Controllers that support machine control, and Network/Software products to support easy information exchange with host systems.

Lineup

CPU Units

CPU Unit Specifications Model
CPU type Power
supply		 Output
method		 Inputs Out-
puts
CP1H-X
CPU Units
1778_lu_1_1		 Memory capacity:
20K steps
High-speed counters:
100 kHz, 4 axes
Pulse outputs:
100 kHz, 4 axes
(Models with transistor
outputs only)		 AC
power
supply		 Relay output 24 16 CP1H-X40DR-A
DC
power
supply		 Transistor
output (sinking)		 CP1H-X40DT-D
Transistor
output (sourcing)		 CP1H-X40DT1-D
CP1H-XA
CPU Units
1778_lu_1_2		 Memory capacity:
20K steps
High-speed counters:
100 kHz, 4 axes
Pulse outputs:
100 kHz, 4 axes
(Models with transistor
outputs only)
Analog inputs: 4
Analog outputs: 2		 AC
power
supply		 Relay output 24 16 CP1H-XA40DR-A
DC
power
supply		 Transistor
output (sinking)		 CP1H-XA40DT-D
Transistor
output (sourcing)		 CP1H-XA40DT1-D
CP1H-Y
CPU Units
1778_lu_1_3		 Memory capacity:
20K steps
High-speed counters:
1 MHz, 2 axes
100 kHz, 2 axes
Pulse outputs:
1 MHz, 2 axes
100 kHz, 2 axes		 DC
power
supply		 Transistor
output (sinking)		 12
+
line-
driver
input,
2 axes		 8
+
line-
driver
output,
2 axes		 CP1H-Y20DT-D

Note: 1. CP1H PLCs are supported by CX-Programmer version 6.1 or higher.
2. Purchase a separately sold Option Unit if you will use RS-232C, RS-422A/485, Ethernet, or LCD.

 

Specifications

General Specifications

Type AC power supply models DC power supply models
Model CP1H-[][][]-A CP1H-[][][]-D
Power supply 100 to 240 VAC 50/60 Hz 24 VDC
Operating voltage range 85 264 VAC 20.4 to 26.4 VDC
(with 4 or more Expansion Units and
Expansion I/O Units: 21.6 to 26.4 VDC)
Power consumption 100 VA max. (CP1H-[][][]-A) 50 W max. (CP1H-[][][]-D)
Inrush current * 100 to 120 VAC inputs:
20 A max. (for cold start at room
temperature)
8 ms max.
200 to 240 VAC inputs:
40 A max. (for cold start at room
temperature),
8 ms max.		 30 A max. (for cold start at room
temperature)
20 ms max.
External power supply 300 mA at 24 VDC None
Insulation resistance 20 MΩ min. (at 500 VDC) between the
external AC terminals and GR terminals		 No insulation between primary and secondary
for DC power supply
Dielectric strength 2,300 VAC at 50/60 Hz for 1 min between
the external AC and GR terminals, leakage
current: 5 mA max.		 No insulation between primary and secondary
for DC power supply
Noise immunity Conforms to IEC 61000-4-4. 2 kV (power supply line)
Vibration resistance Conforms to JIS C60068-2-6. 10 to 57 Hz, 0.075-mm amplitude, 57 to 150 Hz,
acceleration: 9.8 m/s2 in X, Y, and Z directions for 80 minutes each. Sweep time:
8 minutes × 10 sweeps = total time of 80 minutes)
Shock resistance Conforms to JIS C60068-2-27. 147 m/s2 three times each in X, Y, and Z directions
Ambient operating
temperature		 0 to 55°C
Ambient humidity 10% to 90% (with no condensation)
Ambient operating
environment		 No corrosive gas
Ambient storage
temperature		 -20 to 75°C (Excluding battery.)
Power holding time 10 ms min. 2 ms min.

Note: The above values are for a cold start at room temperature for an AC power supply, and for a cold start for a DC power supply.
• A thermistor (with low-temperature current suppression characteristics) is used in the inrush current control circuitry for the AC power supply. The thermistor will not be sufficiently cooled if the ambient temperature is high or if a hot start is performed when the power supply has been OFF for only a short time. In those cases the inrush current values may be higher (as much as two times higher) than those shown above. Always allow for this when selecting fuses and breakers for external circuits.
• A capacitor charge-type delay circuit is used in the inrush current control circuitry for the DC power supply. The capacitor will not be charged if a hot start is performed when the power supply has been OFF for only a short time, so in those cases the inrush current values may be higher (as much as two times higher) than those shown above.

Performance Specifications

Type CP1H-XA
CPU Units		 CP1H-X
CPU Units		 CP1H-Y CPU Units
Models CP1H-XA[][][]-[] CP1H-X[][][]-[] CP1H-Y[][][]-[]
Control method Stored program method
I/O control method Cyclic scan with immediate refreshing
Program language Ladder diagram
Function blocks Maximum number of function block definitions: 128 Maximum number of instances: 256
Languages usable in function block definitions: Ladder diagrams, structured text (ST)
Instruction length 1 to 7 steps per instruction
Instructions Approx. 500 (function codes: 3 digits)
Instruction execution time Basic instructions: 0.10 μs min. Special instructions: 0.15 μs min.
Common processing time 0.7 ms
Program capacity 20K steps
Number of tasks 288 (32 cyclic tasks and 256 interrupt tasks)
Scheduled
interrupt tasks		 1 (interrupt task No. 2, fixed)
Input interrupt
tasks		 8 (interrupt task No. 140 to 147, fixed) 6 (interrupt task No. 140 to 145, fixed)
(Interrupt tasks can also be specified and executed for high-speed counter interrupts.)
Maximum subroutine
number		 256
Maximum jump number 256
I/O areas
*		 Input bits 272bits (17 words): CIO 0.00 to 16.15
Output bits 272bits (17 words): CIO 100.00 to 116.16
Built-in Analog
Inputs		 CIO 200 to CIO 203 —
Built-in Analog
Outputs		 CIO 210 to CIO 211 —
Serial PLC
Link Area		 1,440 bits (90 words): CIO 3100.00 to CIO 3189.15 (CIO 3100 to CIO 3189)
Work bits 8,192 bits (512 words): W0.00 to W511.15 (W0 to W511)
CIO Area: 37,504 bits (2,344 words): CIO 3800.00 to CIO 6143.15 (CIO 3800 to CIO 6143)
TR Area 16 bits: TR0 to TR15
Holding Area 8,192 bits (512 words): H0.00 to H511.15 (H0 to H511)
AR Area Read-only (Write-prohibited): 7168 bits (448 words): A0.00 to A447.15 (A0 to A447)
Read/Write: 8192 bits (512 words): A448.00 to A959.15 (A448 to A959)
Timers 4,096 bits: T0 to T4095
Counters 4,096 bits: C0 to C4095
DM Area 32 Kwords: D0 to D32767
Data Register Area 16 registers (16 bits): DR0 to DR15
Index Register Area 16 registers (32 bits): IR0 to IR15
Task Flag Area 32 flags (32 bits): TK0000 to TK0031
Trace Memory 4,000 words (500 samples for the trace data maximum of 31 bits and 6 words.)
Memory Cassette A special Memory Cassette (CP1W-ME05M) can be mounted.
Note: Can be used for program backups and auto-booting.
Clock function Supported. Accuracy (monthly deviation):
-4.5 min to -0.5 min (ambient temperature: 55°C),
-2.0 min to +2.0 min (ambient temperature: 25°C),
-2.5 min to +1.5 min (ambient temperature: 0°C)
Communications functions One built-in peripheral port (USB 1.1): For connecting Support Software only.
A maximum of two Serial Communications Option Boards can be mounted.
A maximum of two Ethernet Option Boards can be mounted. When using CP1W-CIF41
Ver.1.0, one Ethernet Option Board can be mounted.
Memory backup Flash memory: User programs, parameters (such as the PLC Setup), comment data,
and the entire DM Area can be saved to flash memory as initial values.
Battery backup: The Holding Area, DM Area, and counter values (flags, PV) are backed up
by a battery.
Battery service life 5 years at 25°C. (Use the replacement battery within two years of manufacture.)
Built-in input terminals 40 (24 inputs, 16 outputs) 20 (12 inputs, 8 outputs)
Line-driver inputs: Two axes for phases A,
B, and Z
Line-driver outputs: Two axes for CW and
CCW
Number of connectable
Expansion (I/O) Units		 CP Expansion I/O Units: 7 max.; CJ-series Special I/O Units or CPU Bus Units: 2 max.
Max. number of I/O points 320 (40 built in + 40 per Expansion (I/O)
Unit × 7 Units)		 300 (20 built in + 40 per Expansion (I/O)
Unit × 7 Units)
Interrupt inputs 8 inputs (Shared by the external interrupt
inputs (counter mode) and the quick-
response inputs.)		 6 inputs (Shared by the external interrupt
inputs (counter mode) and the quick-
response inputs.)
Interrupt input counter
mode		 8 inputs (Response frequency: 5 kHz
max. for all interrupt inputs), 16 bits
Up or down counters		 6 inputs (Response frequency: 5 kHz max.
for all interrupt inputs), 16 bits
Up or down counters
Quick-response inputs 8 points (Min. input pulse width: 50 μs max.) 6 points (Min. input pulse width: 50 μs max.)
Scheduled interrupts 1
High-speed counters 4 inputs:
Differential phases (4x), 50 kHz or
Single-phase (pulse plus direction, up/
down, increment), 100 kHz
Value range: 32 bits, Linear mode or ring
mode
Interrupts: Target value comparison or
range comparison		 2 inputs:
Differential phases (4x), 500 kHz or Single-
phase, 1 MHz and
2 inputs:
Differential phases (4x), 50 kHz or Single-
phase (pulse plus direction, up/down,
increment), 100 kHz
Value range: 32 bits, Linear mode or ring
mode
Interrupts: Target value comparison or
range comparison
Pulse
outputs
(models
with
transistor
outputs
only)		 Pulse outputs Trapezoidal or S-curve acceleration and
deceleration (Duty ratio: 50% fixed)
4 outputs, 1 Hz to 100 kHz (CCW/CW or
pulse plus direction)		 Trapezoidal or S-curve acceleration and
deceleration (Duty ratio: 50% fixed)
2 outputs, 1 Hz to 1 MHz (CCW/CW or pulse
plus direction)
2 outputs, 1 Hz to 100 kHz (CCW/CW or
pulse plus direction)
PWM outputs Duty ratio: 0.0% to 100.0% (Unit: 0.1%)
2 outputs, 0.1 to 6553.5 Hz (Accuracy: ±5% at 1 kHz)
Built-in analog I/O terminals 4 analog inputs and
2 analog outputs		 None
Analog control 1 (Setting range: 0 to 255)
External analog input 1 input (Resolution: 1/256, Input range: 0 to 10 V), not isolated

Note: The memory areas for CJ-series Special I/O Units and CPU Bus Units are allocated at the same as for the CJ-series. For details, refer to the CJ Series catalog (Cat. No. P052).

Related products