$ 259.67 – $ 582.36
| Items | Specifications | |||
| Part Number | MCDLN35SE | MBDLN25SE | MDDLN45SE | MADLN05SE |
| Details | A6SE series Position control type (Incremental system only, Pulse train only) without the safety function |
A6SE series Position control type (Incremental system only, Pulse train only) without the safety function |
A6SE series Position control type (Incremental system only, Pulse train only) without the safety function |
A6SE series Position control type (Incremental system only, Pulse train only) without the safety function |
| Family Name | MINAS A6 | MINAS A6 | MINAS A6 | MINAS A6 |
| Series | A6SE series | A6SE series | A6SE series | A6SE series |
| Type | Position control type | Position control type | Position control type | Position control type |
| Frame | C-Frame | B-Frame | D-Frame | A-Frame |
| Frequency response (kHz) | 3.2 | 3.2 | 3.2 | 3.2 |
| Control method | Position control | Position control | Position control | Position control |
| About control method | A6SE series driver (Position control only) does not correspond to the absolute system of using the serial communication with the host device. It supports incremental system only. | A6SE series driver (Position control only) does not correspond to the absolute system of using the serial communication with the host device. It supports incremental system only. | A6SE series driver (Position control only) does not correspond to the absolute system of using the serial communication with the host device. It supports incremental system only. | A6SE series driver (Position control only) does not correspond to the absolute system of using the serial communication with the host device. It supports incremental system only. |
| Safety Function | without | without | without | without |
| Supply voltage | Single/3-phase 200 V | Single/3-phase 200 V | Single/3-phase 200 V | Single/3-phase 200 V |
| I/F Classification of type | Pulse train only | Pulse train only | Pulse train only | Pulse train only |
| Dimensions (W) (Unit: mm) | 65 | 55 | 85 | 40 |
| Dimensions (H) (Unit: mm) | 150 | 150 | 150 | 150 |
| Dimensions (D) (Unit: mm) | 170 | 130 | 170 | 130 |
| Mass (kg) | 1.6 | 1 | 2.1 | 0.8 |
| Environment | For more details, please refer to the instruction manual. | For more details, please refer to the instruction manual. | For more details, please refer to the instruction manual. | For more details, please refer to the instruction manual. |
| Item | Specifications | ||
| Part Number | MEDLN83SE | MADLN15SE | MDDLN55SE |
| Details | A6SE series Position control type (Incremental system only, Pulse train only) without the safety function |
A6SE series Position control type (Incremental system only, Pulse train only) without the safety function |
A6SE series Position control type (Incremental system only, Pulse train only) without the safety function |
| Family Name | MINAS A6 | MINAS A6 | MINAS A6 |
| Series | A6SE series | A6SE series | A6SE series |
| Type | Position control type | Position control type | Position control type |
| Frame | E-Frame | A-Frame | D-Frame |
| Frequency response (kHz) | 3.2 | 3.2 | 3.2 |
| Control method | Position control | Position control | Position control |
| About control method | A6SE series driver (Position control only) does not correspond to the absolute system of using the serial communication with the host device. It supports incremental system only. | A6SE series driver (Position control only) does not correspond to the absolute system of using the serial communication with the host device. It supports incremental system only. | A6SE series driver (Position control only) does not correspond to the absolute system of using the serial communication with the host device. It supports incremental system only. |
| Safety Function | without | without | without |
| Supply voltage | 3-phase 200 V | Single/3-phase 200 V | Single/3-phase 200 V |
| I/F Classification of type | Pulse train only | Pulse train only | Pulse train only |
| Dimensions (W) (Unit: mm) | 85 | 40 | 85 |
| Dimensions (H) (Unit: mm) | 168 | 150 | 150 |
| Dimensions (D) (Unit: mm) | 193 | 130 | 170 |
| Mass (kg) | 2.7 | 0.8 | 2.1 |
| Environment | For more details, please refer to the instruction manual. | For more details, please refer to the instruction manual. | For more details, please refer to the instruction manual. |
Basic Specification
| Item | Specifications | |||
| Part Number | MCDLN35SE | MBDLN25SE | MDDLN45SE | MADLN05SE |
| Input power: Main circuit | Single/3-phase 200 V (+10% -15%) to 240 V (+10% -15%) 50/60 Hz | Single/3-phase 200 V (+10% -15%) to 240 V (+10% -15%) 50/60 Hz | Single/3-phase 200 V (+10% -15%) to 240 V (+10% -15%) 50/60 Hz | Single/3-phase 200 V (+10% -15%) to 240 V (+10% -15%) 50/60 Hz |
| Input power: Control circuit | Single phase 200 V (+10% -15%) to 240 V (+10% -15%) 50/60 Hz | Single phase 200 V (+10% -15%) to 240 V (+10% -15%) 50/60 Hz | Single phase 200 V (+10% -15%) to 240 V (+10% -15%) 50/60 Hz | Single phase 200 V (+10% -15%) to 240 V (+10% -15%) 50/60 Hz |
| Encoder feedback | 23-bit (8388608 resolution) absolute encoder, 7-wire serial | 23-bit (8388608 resolution) absolute encoder, 7-wire serial | 23-bit (8388608 resolution) absolute encoder, 7-wire serial | 23-bit (8388608 resolution) absolute encoder, 7-wire serial |
| About Encoder feedback | * Since it can be used only as an incremental system, do not connect the battery for absolute encoder. Parameter Pr. 0.15 must be set to “1” (factory settings). | * Since it can be used only as an incremental system, do not connect the battery for absolute encoder. Parameter Pr. 0.15 must be set to “1” (factory settings). | * Since it can be used only as an incremental system, do not connect the battery for absolute encoder. Parameter Pr. 0.15 must be set to “1” (factory settings). | * Since it can be used only as an incremental system, do not connect the battery for absolute encoder. Parameter Pr. 0.15 must be set to “1” (factory settings). |
| Parallel I/O connector: Control signal Input |
General purpose 10 inputs The function of general-purpose input is selected by parameters. |
General purpose 10 inputs The function of general-purpose input is selected by parameters. |
General purpose 10 inputs The function of general-purpose input is selected by parameters. |
General purpose 10 inputs The function of general-purpose input is selected by parameters. |
| Parallel I/O connector: Control signal Output |
General purpose 6 output The function of general-purpose output is selected by parameters. |
General purpose 6 output The function of general-purpose output is selected by parameters. |
General purpose 6 output The function of general-purpose output is selected by parameters. |
General purpose 6 output The function of general-purpose output is selected by parameters. |
| Parallel I/O connector: Analog signal Output |
2 outputs (Analog monitor: 2 output) | 2 outputs (Analog monitor: 2 output) | 2 outputs (Analog monitor: 2 output) | 2 outputs (Analog monitor: 2 output) |
| Parallel I/O connector: Pulse signal Input |
2 inputs (Photo-coupler input, Line receiver input) | 2 inputs (Photo-coupler input, Line receiver input) | 2 inputs (Photo-coupler input, Line receiver input) | 2 inputs (Photo-coupler input, Line receiver input) |
| Parallel I/O connector: Pulse signal Output |
4 outputs (Line driver: 3 output, open collector: 1 output) | 4 outputs (Line driver: 3 output, open collector: 1 output) | 4 outputs (Line driver: 3 output, open collector: 1 output) | 4 outputs (Line driver: 3 output, open collector: 1 output) |
| Communication function | USB | USB | USB | USB |
| Communication function: USB | USB interface to connect to computers for parameter setting or status monitoring. | USB interface to connect to computers for parameter setting or status monitoring. | USB interface to connect to computers for parameter setting or status monitoring. | USB interface to connect to computers for parameter setting or status monitoring. |
| Regeneration | Built-in regenerative resistor (external resistor is also enabled.) | No built-in regenerative resistor (external resistor only) | Built-in regenerative resistor (external resistor is also enabled.) | No built-in regenerative resistor (external resistor only) |
| Control mode | Switching among the following 3 mode is enabled, (1) Position control, (2) Internal velocity command, (3) Position/Internal velocity command |
Switching among the following 3 mode is enabled, (1) Position control, (2) Internal velocity command, (3) Position/Internal velocity command |
Switching among the following 3 mode is enabled, (1) Position control, (2) Internal velocity command, (3) Position/Internal velocity command |
Switching among the following 3 mode is enabled, (1) Position control, (2) Internal velocity command, (3) Position/Internal velocity command |
| Item | Specifications | ||
| Part Number | MEDLN83SE | MADLN15SE | MDDLN55SE |
| Input power: Main circuit | 3-phase 200 V (+10% -15%) to 240 V (+10% -15%) 50/60 Hz | Single/3-phase 200 V (+10% -15%) to 240 V (+10% -15%) 50/60 Hz | Single/3-phase 200 V (+10% -15%) to 240 V (+10% -15%) 50/60 Hz |
| Input power: Control circuit | Single phase 200 V (+10% -15%) to 240 V (+10% -15%) 50/60 Hz | Single phase 200 V (+10% -15%) to 240 V (+10% -15%) 50/60 Hz | Single phase 200 V (+10% -15%) to 240 V (+10% -15%) 50/60 Hz |
| Encoder feedback | 23-bit (8388608 resolution) absolute encoder, 7-wire serial | 23-bit (8388608 resolution) absolute encoder, 7-wire serial | 23-bit (8388608 resolution) absolute encoder, 7-wire serial |
| About Encoder feedback | * Since it can be used only as an incremental system, do not connect the battery for absolute encoder. Parameter Pr. 0.15 must be set to “1” (factory settings). | * Since it can be used only as an incremental system, do not connect the battery for absolute encoder. Parameter Pr. 0.15 must be set to “1” (factory settings). | * Since it can be used only as an incremental system, do not connect the battery for absolute encoder. Parameter Pr. 0.15 must be set to “1” (factory settings). |
| Parallel I/O connector: Control signal Input |
General purpose 10 inputs The function of general-purpose input is selected by parameters. |
General purpose 10 inputs The function of general-purpose input is selected by parameters. |
General purpose 10 inputs The function of general-purpose input is selected by parameters. |
| Parallel I/O connector: Control signal Output |
General purpose 6 output The function of general-purpose output is selected by parameters. |
General purpose 6 output The function of general-purpose output is selected by parameters. |
General purpose 6 output The function of general-purpose output is selected by parameters. |
| Parallel I/O connector: Analog signal Output |
2 outputs (Analog monitor: 2 output) | 2 outputs (Analog monitor: 2 output) | 2 outputs (Analog monitor: 2 output) |
| Parallel I/O connector: Pulse signal Input |
2 inputs (Photo-coupler input, Line receiver input) | 2 inputs (Photo-coupler input, Line receiver input) | 2 inputs (Photo-coupler input, Line receiver input) |
| Parallel I/O connector: Pulse signal Output |
4 outputs (Line driver: 3 output, open collector: 1 output) | 4 outputs (Line driver: 3 output, open collector: 1 output) | 4 outputs (Line driver: 3 output, open collector: 1 output) |
| Communication function | USB | USB | USB |
| Communication function: USB | USB interface to connect to computers for parameter setting or status monitoring. | USB interface to connect to computers for parameter setting or status monitoring. | USB interface to connect to computers for parameter setting or status monitoring. |
| Regeneration | Built-in regenerative resistor (external resistor is also enabled.) | No built-in regenerative resistor (external resistor only) | Built-in regenerative resistor (external resistor is also enabled.) |
| Control mode | Switching among the following 3 mode is enabled, (1) Position control, (2) Internal velocity command, (3) Position/Internal velocity command |
Switching among the following 3 mode is enabled, (1) Position control, (2) Internal velocity command, (3) Position/Internal velocity command |
Switching among the following 3 mode is enabled, (1) Position control, (2) Internal velocity command, (3) Position/Internal velocity command |
| Weight | N/A |
|---|---|
| Dimensions | N/A |
INOSAKI Limited
RM B 5/F Gaylord Comm,
Bldg 114-118 Lockhart Rd.
Hong Kong
INOSAKI Sdn. Bhd.
2-1-9, Ground Floor, One Square, Tingkat Mahsuri 1,
11900 Bayan Lepas, Penan
INOSAKI Pte. Ltd.
101 Upper Cross Street,
No. 06-17, People’s Park Centre,
Singapore (058357)
