| Part Number |
6ES7326-2BF01-0AB0 |
| Supply voltage |
|
| Rated value (DC) |
24 V; 1L+ |
| Reverse polarity protection |
Yes |
| Load voltage L+ |
|
| ● Rated value (DC) |
24 V; 2L+, 3L+ |
| ● Reverse polarity protection |
No |
| Input current |
|
| from supply voltage 1L+, max. |
70 mA |
| from load voltage 2L+ (without load), max. |
100 mA |
| from load voltage 3L+ (without load), max. |
100 mA |
| from backplane bus 5 V DC, max. |
100 mA |
| Power loss |
|
| Power loss, typ. |
12 W |
| Digital outputs |
|
| Number of digital outputs |
10 |
| Short-circuit protection |
Yes |
| Limitation of inductive shutdown voltage to |
L+ (-53 V) without series diode, L+ (-33 V) with series diode |
| Switching capacity of the outputs |
|
| ● on lamp load, max. |
5 W |
| Output voltage |
|
| ● for signal “1”, min. |
L+ (-1 V) without series diode, L+ (-1.8 V) with series diode |
| Output current |
|
| ● for signal “1” rated value |
2 A 7 mA |
| ● for signal “1” permissible range for 0 to 40 °C, min. |
| ● for signal “1” permissible range for 0 to 40 °C, max. |
2 A; 2 A for horizontal installation, 1 A for vertical installation |
| ● for signal “1” permissible range for 40 to 60 °C, min. |
7 mA |
| ● for signal “1” permissible range for 40 to 60 °C, max. |
1 A; for horizontal installation |
| ● for signal “0” residual current, max. |
0.5 mA |
| Switching frequency |
|
| ● with resistive load, max. |
10 Hz |
| ● with inductive load, max. |
2 Hz |
| ● on lamp load, max. |
10 Hz |
| Total current of the outputs (per group) |
|
| horizontal installation |
|
| — up to 40 °C, max. |
7.5 A; without series diode, 5 A with series diode |
| — up to 60 °C, max. |
5 A; without series diode, 4 A with series diode |
| vertical installation |
|
| — up to 40 °C, max. |
5 A; without series diode, 4 A with series diode |
| Cable length |
|
| ● shielded, max. |
1 000 m; 200 m for SIL 3, AK 6, Cat 4 |
| ● unshielded, max. |
600 m |
| Interrupts/diagnostics/status information |
| Alarms |
|
| ● Diagnostic alarm |
Yes |
| Diagnoses |
|
| ● Diagnostic information readable |
Yes |
| Diagnostics indication LED |
|
| ● Fail-safe operation |
Yes |
| ● Group error SF (red) |
Yes |
| Potential separation |
|
| Potential separation digital outputs |
|
| ● between the channels |
Yes |
| ● between the channels, in groups of |
5 |
| ● between the channels and backplane bus |
Yes |
| ● between the channels and the power supply of the electronics |
Yes |
| Isolation |
|
| Isolation tested with |
500 V DC/350 V AC |
| Standards, approvals, certificates |
|
| Highest safety class achievable in safety mode |
|
| ● acc. to DIN VDE 0801 |
AK 5 and 6 |
| ● acc. to EN 954 |
Cat. 4 |
| ● Performance level according to ISO 13849-1 |
e |
| ● SIL acc. to IEC 61508 |
SIL 3 |
| connection method / header |
|
| required front connector |
40-pin |
| Dimensions |
|
| Width |
80 mm |
| Height |
125 mm |
| Depth |
120 mm |
| Weights |
|
| Weight, approx. |
465 g |
