The IM 154-1 DP and IM 154-2 DP High Feature interface modules are configured using STEP 7 V5.3 SP3. A hardware support package is available for STEP 7 V5.3 SP2 and higher.
Integration into older versions is possible via GSD.
Siemens Interface Module SIMATIC ET 200pro Product Specifications:
| Article number |
6ES7154-1AA01-0AB0 |
6ES7154-2AA01-0AB0 |
|
ET 200pro, IM 154-1 DP |
ET 200pro, IM154-2 DP HF |
| General information |
|
|
| Product type designation |
IM 154-1 DP |
IM 154-2 DP HF |
| Vendor identification (VendorID) |
8118H |
8119H |
| Supply voltage |
|
|
| Rated value (DC) |
24 V |
24 V |
| Reverse polarity protection |
Yes; against destruction |
Yes; against destruction |
| Short-circuit protection |
Yes; over exchangeable fuses |
Yes; over exchangeable fuses |
| power supply according to NEC Class 2 required |
No |
No |
| Load voltage 2L+ |
|
|
| ● Rated value (DC) |
24 V |
24 V |
| ● Reverse polarity protection |
Yes; against destruction |
Yes; against destruction |
| Input current |
|
|
| from supply voltage 1L+, max. |
200 mA |
200 mA |
| Power loss |
|
|
| Power loss, typ. |
5 W |
5 W |
| Address area |
|
|
| Addressing volume |
|
|
| ● Inputs |
244 byte |
244 byte |
| ● Outputs |
244 byte |
244 byte |
| Interfaces |
|
|
| Interfaces/bus type |
PROFIBUS DP |
PROFIBUS DP |
| Interface types |
|
|
| RS 485 |
|
|
| ● Transmission rate, max. |
12 Mbit/s |
12 Mbit/s |
| ● automatic detection of transmission rate |
Yes |
Yes |
| Protocols |
|
|
| PROFIBUS DP |
|
|
| Services |
|
|
| — SYNC capability |
Yes |
Yes |
| — FREEZE capability |
Yes |
Yes |
| — Direct data exchange (slave-to-slave communication) |
Yes |
Yes |
| Interrupts/diagnostics/status information |
|
|
| Alarms |
|
|
| ● Diagnostic alarm |
Yes; Parameterizable |
Yes; Parameterizable |
| ● Hardware interrupt |
Yes; Parameterizable |
Yes; Parameterizable |
| Diagnostics indication LED |
|
|
| ● For load voltage monitoring |
Yes |
Yes |
| ● Bus fault BF (red) |
Yes |
Yes |
| ● Group error SF (red) |
Yes |
Yes |
| ● Monitoring 24 V voltage supply ON (green) |
Yes |
Yes |
| Parameter |
|
|
| DPV1 operation |
possible |
possible |
| Swapping interrupt |
Parameterizable |
Parameterizable |
| Startup if setpoint not equal to actual configuration |
Parameterizable |
Parameterizable |
| Hot swapping of modules |
possible |
possible |
| Potential separation |
|
|
| between supply voltage and electronics |
Yes |
Yes |
| Isolation |
|
|
| Isolation tested with |
707 V DC (type test) |
707 V DC (type test) |
| Degree and class of protection |
|
|
| IP degree of protection |
IP65/67 |
IP65/67 |
| Ambient conditions |
|
|
| Ambient temperature during operation |
|
|
| ● min. |
-25 °C |
-25 °C |
| ● max. |
55 °C |
55 °C |
| Ambient temperature during storage/transportation |
|
|
| ● min. |
-40 °C |
-40 °C |
| ● max. |
70 °C |
70 °C |
| Dimensions |
|
|
| Width |
90 mm |
90 mm |
| Height |
130 mm |
130 mm |
| Depth |
60 mm |
60 mm |
| Weights |
|
|
| Weight, approx. |
375 g |
375 g |
