| General information |
|
| Article Number |
6ES7392-1AM00-0AA0 |
| Product type designation |
Front connector |
| Ambient conditions |
|
| Ambient temperature during operation |
|
| ● min. |
0 °C |
| ● max. |
60 °C |
| Ambient temperature during storage/transportation |
|
| ● min. |
-40 °C |
| ● max. |
70 °C |
| Accessories |
|
| belongs to product |
S7-300 |
| connection method / header |
|
| Connection I/O signals |
|
| ● Connection method |
Screw terminals |
| ● Number of lines per connection |
1; Or 2 cables up to 0.75 mm² (total) in a shared end sleeve |
| Conductor cross-section in mm² |
|
| — Connectable cable cross-sections for massive cables, min. |
0.14 mm² |
| — Connectable cable cross-sections for massive cables, min. |
0.75 mm² |
| — Connectable cable cross-sections for flexible cables without end sleeve, min. |
0.14 mm² |
| — Connectable cable cross-sections for flexible cables without end sleeve, max. |
0.75 mm² |
| — Connectable cable cross-sections for flexible cables with end sleeve, min. |
0.14 mm² |
| — Connectable cable cross-sections for flexible cables with end sleeve, max. |
0.75 mm² |
| Conductor cross-section acc. to AWG |
|
| — Connectable cable cross-sections for massive cables, min. |
24 |
| — Connectable cable cross-sections for massive cables, min. |
19 |
| — Connectable cable cross-sections for flexible cables without end sleeve, min. |
24 |
| — Connectable cable cross-sections for flexible cables without end sleeve, max. |
19 |
| — Connectable cable cross-sections for flexible cables with end sleeve, min. |
24 |
| — Connectable cable cross-sections for flexible cables with end sleeve, max. |
19 |
| Wire end processing |
|
|
|
| 6ES73921AM000AA0 |
Subject to change without notice |
| 8/26/2022 |
|
| Page 1/2 |
© Copyright Siemens |
| — Stripped length of cables, min. |
6 mm |
| — Stripped length of cables, max. |
6 mm |
| — End sleeve acc. to DIN 46228 without plastic sleeve |
Design A, 5 mm to 7 mm long |
| — End sleeve acc. to DIN 46228 with plastic sleeve |
Design E, up to 6 mm long |
| Mounting |
|
| — Tool |
Screwdriver, conical design, 3 mm to 3.5 mm |
| — Tightening torque, min. |
0.4 N·m |
| — Tightening torque, max. |
0.7 N·m |
| Dimensions |
|
| Width |
21.6 mm |
| Height |
125 mm |
| Depth |
40.9 mm |
| Weights |
|
| Weight, approx. |
137 g |
