Name: TRIO-PS-IP67/3AC/24DC/20 - 1039829 - Phoenix Contact Power Supply
SKU: Phoenix Contact 1039829
Price: 236.9 USD
Availability: InStock

$ 236.90

SKU Phoenix Contact 1039829 Category Phoenix Contact TRIO POWER

Inosaki is one of the largest Phoenix Contact Distributors to provide terminal block, interface module, power supply and relay. And our best offer for terminal block types are Feed-through, Fuse Modular, Spring Cage, Double Level, and Multi-level, hence the series model references to PT Series, ST Series, TB Series, UT Series, UK Series. In additional for power supply are QUINT Power, STEP Power, Trio Power, and UNO Power. Please email us for catalog: sales@inosaki.my

Dimensions

Width	151 mm
Height	304 mm
Depth	120 mm
Installation distance right/left	20 mm / 20 mm
Installation distance top/bottom	50 mm / 100 mm

Ambient conditions

Degree of protection	IP67
Inflammability class in acc. with UL 94 (housing / terminal blocks)	V0
Ambient temperature (operation)	-25 °C … 85 °C (Derating > 60 °C (3 AC): 2,5 %/K / > 50 °C (2 AC): 2,5 %/K)
Ambient temperature (start-up type tested)	-40 °C
Ambient temperature (storage/transport)	-40 °C … 85 °C
Max. permissible relative humidity (operation)	≤ 95 % (at 25 °C, non-condensing)
Climatic class	3K3 (in acc. with EN 60721)
Degree of pollution	4
Installation height	≤ 4000 m (> 2000 m, Derating: 10 %/1000 m)

Input data

Nominal input voltage range	3x 400 V AC … 500 V AC
	2x 400 V AC … 500 V AC
Input voltage range	3x 400 V AC … 500 V AC -20 % ….+15 %
	2x 400 V AC … 500 V AC -10 % … +15 %
AC frequency range	50 Hz … 60 Hz
Discharge current to PE	< 3.5 mA
Current consumption	3x 1.2 A (400 V AC)
	3x 1 A (500 V AC)
	2x 2.3 A (400 V AC)
	2x 1.9 A (500 V AC)
Nominal power consumption	39 W
Inrush current	typ. 22 A (at 25 °C)
Mains buffering time	typ. 10 ms (400 V AC)
	typ. 20 ms (500 V AC)
Input fuse	3.15 A (internal (device protection), slow-blow)
Recommended breaker for input protection	6 A … 16 A (Characteristics B, C, D, K)
Type of protection	Transient surge protection
Protective circuit/component	Varistor

Output data

Nominal output voltage	24 V DC ±1 %
Nominal output current (I_N)	20 A
Dynamic Boost (I_Dyn.Boost)	30 A (5 s)
Derating	> 60 °C … 70 °C (2.5%/K)
Protection against overvoltage at the output (OVP)	≤ 30 V DC
Control deviation	< 1 % (change in load, static 10 % … 90 %)
	< 3 % (Dynamic load change 10 % … 90 %, 10 Hz)
	< 0.1 % (change in input voltage ±10 %)
Residual ripple	≤ 20 mV_PP
Output power	480 W
Typical response time	< 1 s
Maximum power dissipation in no-load condition	< 2 W (400 V AC)
	< 2.5 W (480 V AC)
Power loss nominal load max.	< 44 W (400 V AC)
	< 44 W (480 V AC)

General

Article Number	1039829
Net weight	3.7 kg
Efficiency	93 % (400 V AC)
	93 % (500 V AC)
MTBF (IEC 61709, SN 29500)	> 1500000 h (25 °C)
	> 620000 h (40 °C)
	> 230000 h (60 °C)
Insulation voltage input/output	4 kV AC (type test)
	1.5 kV AC (routine test)
Degree of protection	IP67
Protection class	I
Inflammability class in acc. with UL 94 (housing / terminal blocks)	V0
Assembly instructions	Alignable: 20 mm horizontally, 50 mm vertically above, 100 mm vertically below

Connection data, input

Connection method	Circular connector
Type of locking	M12 screw locking
Coding	S-coded
Number of positions	4

Connection data, output

Connection method	Circular connector
Type of locking	M17 standard and SPEEDCON locking
Coding	N-coded
Number of positions	4

Connection data for signaling

Connection method	Circular connector
Type of locking	SPEEDCON M12
Coding	A-coded
Number of positions	5

Standards

Standard – Electrical safety	IEC 61010-2-201 (SELV)
Standard – Safety extra-low voltage	EN 60204-1 (PELV)
Standard – Safe isolation	DIN VDE 0100-410
Standard – Limitation of mains harmonic currents	EN 61000-3-2
Overvoltage category EN 61010-1	III (≤ 2000 m)
	II (≤ 4000 m)

EMC data

Electromagnetic compatibility	Conformance with EMC Directive 2014/30/EU
Low Voltage Directive	Conformance with Low Voltage Directive 2014/35/EC
Conducted noise emission	EN 55016
	EN 61000-6-3 (Class B)
Noise emission	EN 55016
	EN 61000-6-3 (Class B)
Flicker	EN 61000-3-3
Electrostatic discharge	EN 61000-4-2
Contact discharge	6 kV (Test Level 4)
Discharge in air	8 kV (Test Level 4)
Electromagnetic HF field	EN 61000-4-3
Frequency range	80 MHz … 1 GHz
Test field strength	10 V/m (Test Level 3)
Frequency range	1 GHz … 2 GHz
Test field strength	10 V/m (Test Level 3)
Frequency range	2 GHz … 3 GHz
Test field strength	10 V/m (Test Level 3)
Comments	Criterion A
Fast transients (burst)	EN 61000-4-4
Input	4 kV (Test Level 4 – asymmetrical)
Output	2 kV (Test Level 3 – asymmetrical)
Signal	1 kV (Test Level 2 – asymmetrical)
Comments	Criterion A
Surge voltage load (surge)	EN 61000-4-5
Input	2 kV (Test Level 3 – symmetrical)
	4 kV (Test Level 4 – asymmetrical)
Output	1 kV (Test Level 2 – symmetrical)
	2 kV (Test Level 1 – asymmetrical)
Signal	1 kV (Test Level 1 – asymmetrical)
Comments	Criterion B
Conducted interference	EN 61000-4-6
Frequency range	0.15 MHz … 80 MHz
Voltage	10 V (Test Level 3)
Comments	Criterion A
Voltage dips	EN 61000-4-11
Voltage	400 V AC
Frequency	50 Hz
Voltage dip	70 %
Number of periods	25 periods
Additional text	Test Level 2
Comments	Criterion A
Voltage dip	40 %
Number of periods	10 periods
Additional text	Test Level 2
Comments	Criterion A
Voltage dip	0 %
Number of periods	1 period
Additional text	Test Level 2
Comments	Criterion A
Criterion A	Normal operating behavior within the specified limits.
Criterion B	Temporary impairment to operational behavior that is corrected by the device itself.
Criterion C	Temporary adverse effects on the operating behavior, which the device corrects automatically or which can be restored by actuating the operating elements.