Omron EE-SPY311/312 EE-SPY411/412 – Photomicro Sensors- Limited-Reflective

USD $ 27.50 – USD $ 125.62

SKU: N/A

Omron produce industrial sensors range such as fiber sensors, photoelectric sensors, displacement sensors/ measurement sensors, proximity sensors, photomicro sensors and rotary encodes.

Features

• A shiny background can be used as long as the distance between the sensor and the background is 20 mm or more.

• Detects minute objects such as a 0.05-mm-dia. pure copper wire.

• Small dispersion in sensing distance.

• Light modulation effectively reduces external light interference.

• Wide operating voltage range: 5 to 24 VDC

 

Lineup

Sensors

Appearance Sensing method Sensing distance Output type Output configuration Model
Horizontal type
Convergent
reflective type		 2 to 5 mm
(Infrared light)		 NPN output Dark-ON EE-SPY311
Light-ON EE-SPY411
Vertical type
Dark-ON EE-SPY312
Light-ON EE-SPY412

 

Accessories (Order Separately)

Type Cable length Model
Connector Connector EE-1001
EE-1009 *
Connector with Cable 1 m EE-1006 1M
EE-1010 1M *
2 m EE-1006 2M
EE-1010 2M *
Connector with Robot Cable 1 m EE-1010-R 1M *
2 m EE-1010-R 2M *
NPN/PNP Conversion Connector 0.46 m (total length) EE-2002

Note: Refer to Accessories for details.
* EE-1009- or EE-1010-series Connectors have a builtin locking mechanism to prevent cable disconnection when only the cable is pulled. To remove the Connector from the Sensor, grip the top and bottom of the Connector firmly and push into the Sensor once before pulling out. The locking mechanism prevents the Connector from being removed by pulling on the cable only and enables removal only when the Connector (housing) is pulled.

 

Specifications

Models EE-SPY311, EE-SPY411, EE-SPY312, EE-SPY412
Sensing distance 2 to 5 mm (Reflection factor: 90%; white paper 15 × 15 mm)
Minimum sensing object Pure copper wire (0.05 mm dia.)
Distance to background *1 20 mm max. (glass with aluminum deposition)
Differential distance 0.2 mm (with a sensing distance of 3 mm, horizontally)
Light source GaAs infrared LED with a peak wavelength of 940 nm
Indicator *2 Light indicator (red)
Supply voltage 5 to 24 VDC ±10%, ripple (p-p): 5% max.
Current consumption Average: 15 mA max., Peak: 50 mA max.
Control output NPN voltage output:
Load power supply voltage: 5 to 24 VDC
Load current: 80 mA max.
OFF current: 0.5 mA max.
80 mA load current with a residual voltage of 1.0 V max.
10 mA load current with a residual voltage of 0.4 V max.
Response frequency *3 100 Hz min.
Ambient illumination 3,000 lx max. with incandescent light or sunlight on the surface of the receiver
Ambient temperature
range		 Operating: – 10 to +55 ° C
Storage: – 25 to +65 ° C
Ambient humidity range Operating: 5% to 85%
Storage: 5% to 95%
Vibration resistance Destruction: 10 to 50 Hz, 1.5-mm double amplitude for 2 h each in X, Y, and Z directions
Shock resistance Destruction: 500m/s2 for 3 times each in X, Y, and Z directions
Degree of protection IEC IP50
Connecting method Special connector (soldering not possible)
Weight Approx. 2.6 g
Material Case Polycarbonate
Holder Polybutylene phthalate (PBT)

*1.

EE-SPY31 / 41 Specifications 2

*2. The indicator is a GaP red LED (peak wavelength: 700 nm).
*3. The response frequency was measured by detecting the following rotating disk.

EE-SPY31 / 41 Specifications 3

Related products