Omron produce industrial sensors range such as fiber sensors, photoelectric sensors, displacement sensors/ measurement sensors, proximity sensors, photomicro sensors and rotary encodes.
Features
• Noise resistance equivalent to photomicrosensors with built-in amplifiers.
• Resistance to common noise at least 30 times that of previous models.
• Resistance to inverter noise at least 10 times that of previous models.
• Reverse polarity protection built in.
Lineup
Sensors
| Sensing method | Sensing distance (slot width) |
Output type | Output configuration |
Model |
|---|---|---|---|---|
| Through-beam type (with slot) |
13 mm (slot width) (Infrared light) |
NPN output | Dark-ON | EE-SPX303N |
| Light-ON | EE-SPX403N |
Accessories (Order Separately)
| Type | Cable length | Model | |
|---|---|---|---|
| Connector | Connector | EE-1001 | |
| EE-1009 * | |||
| Connector with Cable | 1 m | EE-1006 1M | |
| EE-1010 1M * | |||
| 2 m | EE-1006 2M | ||
| EE-1010 2M * | |||
| Connector with Robot Cable | 1 m | EE-1010-R 1M * | |
| 2 m | EE-1010-R 2M * | ||
| NPN/PNP Conversion Connector | 0.46 m (total length) | EE-2002 | |
Note: Refer to EE-[] Catalog for details.
* EE-1009- or EE-1010-series Connectors have a builtin locking mechanism to prevent cable disconnection when only the cable is pulled. To remove the Connector from the Sensor, grip the top and bottom of the Connector firmly and push into the Sensor once before pulling out. The locking mechanism prevents the Connector from being removed by pulling on the cable only and enables removal only when the Connector (housing) is pulled.
Specifications
| Models | EE-SPX303N, EE-SPX403N |
|---|---|
| Sensing distance | 13 mm (slot width) |
| Sensing object | Opaque: 2.2 × 0.5 mm min. |
| Differential distance | 0.05 mm max. |
| Light source | Infrared LED (pulse lighting) with a peak wavelength of 940 nm |
| Indicator | Light indicator (red) |
| Supply voltage | 12 to 24 VDC ±10%, ripple (p-p): 5% max. |
| Current consumption | 15 mA max. |
| Control output | NPN voltage output: Load power supply voltage: 12 to 24 VDC Load current: 80 mA max. OFF current: 0.5 mA max. 80 mA load current with a residual voltage of 2.0 V max. 10 mA load current with a residual voltage of 1.0 V max. |
| Protection circuits | Power supply reverse polarity protection, Output reverse polarity protection |
| Response frequency * | 100 Hz min. |
| Ambient illumination | 3,000 lx max. with incandescent light or sunlight on the surface of the receiver. |
| Ambient temperature range | Operating: -10 to +55°C Storage: -25 to +65°C |
| Ambient humidity range | Operating: 5% to 85% Storage: 5% to 95% |
| Vibration resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 h each in X, Y, and Z directions |
| Shock resistance | Destruction: 500 m/s2 for 3 times each in X, Y, and Z directions |
| Degree of protection | IEC IP50 |
| Connecting method | Special connector (soldering not possible) |
| Weight | Approx. 4 g |
| Material | Polycarbonate |
* The response frequency was measured by detecting the following rotating disk.
