W4-3 – WL4-3F3130 Photoelectric Sensors – Miniature Photoelectric Sensors – SICK Sensor

USD $ 99.00

Out of stock

SKU: N/A

SICK sensor one of the world’s leading producers of sensors and sensor solutions for industrial applications. SICK is a technology and market leader in Factory and Logistics Automation as well as Process Automation. The sensor range are: Laser Sensors, Cylinder Sensors, Photoelectric Sensors, Fork Sensors, Encoders, Color Sensors, Distance Sensor, Contrast Sensor, Color Sensor, Inductive Proximity Sensors, Fiber Optic Sensor with our signature range sick sensor intelligence.

Part Number:1028153
Photoelectric Sensor Model: WL4-3F3130
OEM Spec Ref 

Features

Sensor/ detection principle Photoelectric retro-reflective sensor, Dual lens
Dimensions (W x H x D) 16 mm x 39.5 mm x 12 mm
Housing design (light emission) Rectangular
Sensing range max. 0.01 m … 4.5 m 1)
Sensing range 0.02 m … 3.5 m 1)
Type of light Visible red light
Light source PinPoint LED 2)
Light spot size (distance) Ø 75 mm (1.5 m)
Wave length 650 nm
Adjustment None
  • 1) Reflector PL80A.
  • 2) Average service life: 100,000 h at TU = +25 °C.

Mechanics/electronics

Supply voltage 10 V DC … 30 V DC 1)
Ripple < 5 Vpp 2)
Current consumption 20 mA 3)
Switching output PNP
Switching mode Dark switching
Output current Imax. ≤ 100 mA
Response time < 0.5 ms 4)
Switching frequency 1,000 Hz 5)
Connection type Cable with connector M8, 3-pin, 100 mm 6)
Cable material PVC
Conductor cross-section 0.14 mm²
Cable diameter Ø 3.4 mm
Circuit protection 7)

8)

9)

Protection class III
Weight 30 g
Polarisation filter
Housing material Plastic, ABS
Optics material Plastic, PMMA
Enclosure rating IP67

IP66

Ambient operating temperature –40 °C … +60 °C
Ambient storage temperature –40 °C … +75 °C
UL File No. NRKH.E181493 & NRKH7.E181493
  • 1) Limit values.
  • 2) May not exceed or fall below Uv tolerances.
  • 3) Without load.
  • 4) Signal transit time with resistive load.
  • 5) With light/dark ratio 1:1.
  • 6) Do not bend below 0 °C.
  • 7) A = VS connections reverse-polarity protected.
  • 8) C = interference suppression.
  • 9) D = outputs overcurrent and short-circuit protected.